NX 多应用环境和Teamcenter集成新功能简介
一些新的功能，感兴趣的可以简单了解下！从Teamcenter胖客户端或Active Workspace Web客户端启动NX时，您现在可以选择除环境以外的特定应用程序。 如果您有多个使用不同NX环境的项目，则在启动NX时，这将给您更多的控制权。
除了环境之外，还提供启动应用程序的选择，使您能够根据需要启动NX，而无需提供其他配置。AWC 中启动在Active Workspace Web客户端中，从全局导航中，单击您的配置文件图标以显示您的配置文件列表。 单击列表顶部的客户端应用程序，然后选择该应用程序。 您可以直接在下面单击环境列表，然后选择一个NX环境。 然后，您可以在选定的NX环境和应用程序中打开零件或部件。https://mmbiz.qlogo.cn/mmbiz_png/N6x8IJWZW5ht3Gxqn1hhKF0zia0RSnTw1rEAhCDMcicR0olxGqrLVpGb3dIUE1x073nUj99Xv86t4PWPUfEkYGEg/0?wx_fmt=pnghttps://mmbiz.qlogo.cn/mmbiz_png/N6x8IJWZW5ht3Gxqn1hhKF0zia0RSnTw12xukwtsqQYTNJdPMdViauGVUD3Jj2JNvLVj8sZpmZxEwTwDic5Siccbrg/0?wx_fmt=png
AWC的版本要在4.1以上哦
从Teamcenter启动NX在Teamcenter富客户端中，将“客户端应用程序”选择添加到“用户设置”对话框中。 这使您可以从Teamcenter Rich Client中选择的NX环境和应用程序启动。
https://mmbiz.qlogo.cn/mmbiz_png/N6x8IJWZW5ht3Gxqn1hhKF0zia0RSnTw1UTjEzo69JUEtOHpytV4wzhY0AlowsVNeklpmPZ7mJQI7b87HXDCJQQ/0?wx_fmt=png
所选的应用程序也会与环境一起显示在Teamcenter富客户端中的应用程序上方显示。https://mmbiz.qlogo.cn/mmbiz_png/N6x8IJWZW5ht3Gxqn1hhKF0zia0RSnTw1JdPfvG3rNA1icibJGQOoSpz4loE5S2zxnDKwYlH47BhVmnjTKRwp7QwQ/0?wx_fmt=png同时在NX的装配导航器上，NX_ENVIRONMENT列已添加到Assembly Navigator。 如果您的NX安装是针对不同的环境设置的，则可以查看在其中创建装配的每个零件的NX环境。
https://mmbiz.qlogo.cn/mmbiz_png/N6x8IJWZW5ht3Gxqn1hhKF0zia0RSnTw15FybDXObY7qHME3H1YDUVRkCvnX4xiaQafN91Agys80xF11C4Qhicbgw/0?wx_fmt=png如何启用此功能呢，需要设置新的和现有的Teamcenter首选项。“ You can set up the NX environments for Active Workspace and the Teamcenter rich client using the following Teamcenter preferences:
[*]TC_NX_EnvironmentsLists the names of the NX environments.
[*]TC_NX_Current_EnvironmentSets the default NX environment. You can set any environment defined in the TC_NX_Environment preference.
[*]TC_NX_Location_for_<NX environment name>Defines the location of UGII_BASE_DIR for the environment. You can set a separate preference for each NX environment using the environment name defined in TC_NX_Environments.For example:
[*]TC_NX_Location_for_XLZ Manufacturing=C:\Siemens\nx1872
[*]TC_NX_FileNewPAXFiles_<NX environment name>(Optional). Defines the location of the PAX files for the environment. Set a separate preference for each environment.If this preference is not set, then the version-specific PAX files are used. For more information, see Define the preference for PAX files.For example:
[*]TC_NX_FileNewPAXFiles_XLZ Manufacturing=<location of PAX files>
[*]appbar_title_contents(Optional). Lets you add the environment and application values to display the selected environment in the Teamcenter rich client application banner.
[*]TC_NX_ApplicationsLists the applications available, such as NX, NX Viewer, NX Layout, and so on.
[*]TC_NX_Current_ApplicationSets the default application. You can set any application defined in the TC_NX_Applications preference.
[*]TC_NX_App_Switch_For_<app name>Specifies an application other than the standard NX applications. This is for applications not known by NX. You can then add it to TC_NX_Applications.
[*]AWC_NX_ApplicationAndEnvironmentIsSupportedEnables Active Workspace to support the selection of environment and application. The default is FALSE.
[*]TC_NX_OEM_DEFINITION_DIR(Optional). Lets you further define the environments by specifying a ugii_env.dat file for each environment.Set the preference to a folder location. Under that folder, you need to have a folder for each environment that matches the names of the environments. In each folder, place the ugii_env.dat file for that environment.
”
https://mmbiz.qpic.cn/mmbiz_gif/N6x8IJWZW5gjw4wuPf23WYibz3QqCUWIQjoaJqgHoPVccFrVsgXm4aW4DFsLWCn2VLUFJGLdefA2waib1pUIuKIA/640?wx_fmt=gif
https://mmbiz.qpic.cn/mmbiz_gif/iaGswicCbWm68wqkrhpohAEVEY19Kskyds4Zkqz2GDYZaA016IWpmBzeSUdg0B1zutiaX51y5N8vKrGBlbVwH8ickQ/640?wx_fmt=gifENDPLM之家plmhomehttps://mmbiz.qpic.cn/mmbiz_jpg/N6x8IJWZW5hqicgwQsFR48mHmZ7OJ2SqiavCqV0P04ghufWGO5oziaT2EJpORVo9aIkicXkfzfOhBu63cCX7JtBY1Q/640?wx_fmt=jpeg
▲长按二维码“识别”关注
页:
[1]