NX10.0.3新版本修复的问题列表
Fixed Problem ReportsNX 10.0.3PR
Description
6273244
A part which has Linked Composite Curve created before NX 7.5.1, andhas source parts completely unloaded, may show curves in wrong positionafter Part Import
6987529
This issue was when two concentric circle or arcswere used as input to create the 2D centerline, we created an approximatearc in between, and hence the dimension values were slightly off
7276407
1. 7404509
Selection issue for link type filter - There is logicin bui_layer.cselection_cb()that always adds a new cog marker to the selection list if the selectionlist contains a link object. To avoid this, check that the cog markeris not already in the selection list before adding it.
2.7276407
Hide Pattern Feature does not work if datum csysis patterned - There is a call to FREC_is_global_selectable()in IsRmFeatureSupported()for pattern features that caused this regression. Removed the call to FREC_is_global_selectable().
7340173
Leader location of the labels having no text changeson view update
7392623
Leader location of the labels having no text changeson view update
7397240
The problem where the datasetnamefor PDF exportcan be changed if it contains a colon or slash is fixed
7403885
A number of autotestsare failing due to the OMcheck world failure of PART_placeholderobject created for stubs resolution
7404509
1. 7404509
Selection issue for link type filter - There is logicin bui_layer.cselection_cb()that always adds a new cog marker to the selection list if the selectionlist contains a link object. To avoid this, check that the cog markeris not already in the selection list before adding it.
2. 7276407
Hide Pattern Feature does not work if datum csysis patterned - There is a call to FREC_is_global_selectable()in IsRmFeatureSupported()for pattern features that caused this regression. Removed the call to FREC_is_global_selectable().
7419493
A part which has Linked Composite Curve created before NX 751, andhas source parts completely unloaded, may show curves in wrong positionafter Part Import
7424602
1. 7498710 "EB2015"
Customsymbol leader arrow heads change orientation in TcVisfor VDG
2. 7498696 "EB2015"
In View dependent geometry holecallout dimn valuesare missing in TcVis3. Avoid processing pending instances. It generates an exception.
7451718
View stored on the SO objects referenced by Associativelyclasses are out of date. Editing the Associatively is only changing theview stored on Associatively class, but not on the referenced SO class.
7452021
Annotations with extensions are hidden when view breakis applied
7453295
A number of autotestsare failing due to the OMcheck world failure of PART_placeholderobject created for stubs resolution
7461929
This CPwill fix the following PRs7461929, 8277290, 7432871, 7495264, PR7508401, PR7513312, PR7509156, PR7516040,PR7514922, PR7515960, PR7518217, 8280972
7467273
The display of assembly parts for grooving tools withan tool tip junction at a different corner then the first was wrong
7476679
A number of autotestsare failing due to the OMcheck world failure of PART_placeholderobject created for stubs resolution
7478090
Leader location of the labels having no text changeson view update
7479358
Copy/Paste does not handle UI error in UI codes
7479663
A number of autotestsare failing due to the OMcheck world failure of PART_placeholderobject created for stubs resolution
7484052
A number of autotestsare failing due to the OMcheck world failure of PART_placeholderobject created for stubs resolution
7486047
The Origin Symbol arrowhead is displaying as filledin JT whenviewed in TCVis
7489249
Deleting a newly created Udewill cause an internal error when closing the part
7492187
These issues are EBrelated issues and solves the LWSVcases.
7495264
This CPwill fix the following PRs7461929, 8277290, 7432871, 7495264, PR7508401, PR7513312, PR7509156, PR7516040,PR7514922, PR7515960, PR7518217, 8280972
7498696
1. 7498710 "EB2015"
Custom symbol leader arrow heads change orientationin TcVis for VDG
2. 7498696 "EB2015"
In View dependent geometry holecallout dim values are missing in TcVis
3. Avoid processing pending instances. It generatesan exception
7498710
1. 7498710 "EB2015"
Custom symbol leader arrow heads change orientationin TcVis for VDG
2. 7498696 "EB2015"
In View dependent geometry holecallout dim values are missing in TcVis
3. Avoid processing pending instances. It generatesan exception
7498845
The problem where the datasetnamefor PDF exportcan be changed if it contains a colon or slash is fixed
7499949
The display of assembly parts for grooving tools withan tool tip junction at a different corner then the first was wrong
7508401
This CPwill fix the following PRs7461929, 8277290, 7432871, 7495264, PR7508401, PR7513312, PR7509156, PR7516040,PR7514922, PR7515960, PR7518217, 8280972
7509156
This CPwill fix the following PRs7461929, 8277290, 7432871, 7495264, PR7508401, PR7513312, PR7509156, PR7516040,PR7514922, PR7515960, PR7518217, 8280972
7510245
An internal error results from toggling a UI settingfor group nesting after hiding the default grou.
7511122
If user resend sends a Assembly with a variant configurationfrom Structure Manager to NX, NX presenta dialog to Add or Replace Variants, this is unsupported ., and user doesAdd or Replace it causes a crash. The change is to block this functionality,and allow only when OLD_VARIANTSis used
7513312
This CPwill fix the following PRs7461929, 8277290, 7432871, 7495264, PR7508401, PR7513312, PR7509156, PR7516040,PR7514922, PR7515960, PR7518217, 8280972
7514048
The problem where the datasetnamefor PDF exportcan be changed if it contains a colon or slash is fixed
7514831
Resolve PRsrelated to Daimler Enhancement Request for Convert Legacy Weld Points
7515446
The problem where the datasetnamefor PDF exportcan be changed if it contains a colon or slash is fixed
7516187
The OMcheck error occurs when edit the encrypted processor
7516751
This is to fix Daimler relinkercached expression issue
7517130
An internal error results from toggling a UI settingfor group nesting after hiding the default group
7519740
Values on dialog are incorrect when editing MAD
7521681
Copy/Paste does not handle UI error in UI codes
7526846
These issues are EBrelated issues and solves the LWSVcases
7527170
See PR Text
7527332
See PR Text
7527417
See PR Text
7528470
The issue reported in PR7522519 that Spark Gap settingsnot kept if position values are changed is fixed
7530542
The display of assembly parts for grooving tools withan tool tip junction at a different corner then the first was wrong
7533256
The auto and manual Tool Change settings are missing
8251179
In the old part family template if we add any newmember at last row, the last row was getting replaced with existing memberat first row
8270898
Feature Playback failed due to change in Law Extensionfeature
8275328
Leader location of the labels having no text changeson view update
8276596
Problem was originally fixed in NX10.0.3 but the change had to be backportedto NX 10.0.2MP.There was a new version token added for the MPfix. That token needs to be reused in NX10.0.3 so that parts created in NX10.0.2MP don't regress in NX10.0.3.
8277626
1) when creating reuse features in a different featuregroup, the reused weld points are left in the original feature group
2) a change was made to the signature of 2 NXopenfunctions in NX10 that may affect the stability of existing customer NXOpenfunctions
8277662
This is to fix customer relinkerfailure in managed mode and one IEwith view feature failure in case of part being closed
8510681
An internal error results from toggling a UI settingfor group nesting after hiding the default group
1127613
Misbehavior Wave Geometry-Linker
1127821
Wrong tool path computation in PLANAR PROFILE
1127824
Law Extension Miter Method
1127845
Sketch coincident constraint snaps to opposite endpoint of edge than selected
1127902
Routing Reuse search does not filter on previous selection
1127927
Curve Length Bug in NX9.0.3
1127954
Error - Invalid view sequence number found, creatingStock Offset SplinePoint
1127974
Not able to open Partfile(last stored in NX9.0.1) in NX9.0.2.5 D3, 04Aug14
1127978
Wrong Zdirection of weld point created by existing points
1128001
Unknown IPWCollision Checking
1128175
NXOpencan't get Dimension Hole AND Shaft tolvalues from FitSymbolsAndLimits
1128277
Editing of splinepath created Pre NX9.0 takes a long time
1128535
Constraints not displayed on screen when creatingpath with Lock Length _ Angle
1128541
Routing assembly constraints show the incorrect valuein the display
1128678
Cannot add drawing for undercut blank due to missing EW_COMPONENT_TYPE
1128688
Show exact fails on JTfile
1128705
Electrode Design Blank increases undercut REF_Zvalue on each Position Update
1128757
Multiple bodies in global shaping results in scatteredsheet bodies
1128761
Studio splinein expand view
1128937
PMIReference Plane_DatumPlane not translated from NX9.0.3.4 to JT
1129052
Reference Text Attribute does not update after revise
1129167
Strange behavior during edit reusable components
1129175
COMError 80010100 while creating parts from complex part family
1129227
Colors on faces are not preserved during Feature Playback
1129234
Law extension surface doesn't meet quality
1129704
Wrong dimension value in view break
1129803
Cannot create desired development with One Step -Entire Uniform
1760113
Mirrored faceted bodies get dimmed colours
1791299
Streamline gouges in the part
1793082
CAM: PR - Turning - Toolpathwith Custom Stock Value is not created correctly
1814361
Problem with center marks
1820370
Change in custom boundary stock values is not handledcorrectly
1822765
Same Cylindrical centerline selection does not givethe same dimension
1835918
Retain Annotation font set to invisible does not workfor 3D centerlines
1842352
2D Centerlines not updated in Revolved Section View
1844476
8251179- In the old part family template if we addany new member at last row, the last row was getting replaced with existingmember at first row
1845934
8251179- In the old part family template if we addany new member at last row, the last row was getting replaced with existingmember at first row
1848798
NXhangs when creating Formboard
1850987
Place part does not work in native environment
1866971
Family Object Name is invalid with specified attributeand space character
1870054
Orient branch fails following flip component
1874908
Create interpartlink default at off is still creating Wavelinkedbody
1875433
Open whole assembly in NX7.5 - opens only one level at time
1878931
Keep switch settings in session memory in selectiontool bar
1884620
1D mesh direction change
1891032
Stock Values for Custom Member Boundary work wrongwhen Curves have wrong direct
1903841
Points not added correctly when editing splinepath
1908820
Shell element stress results wrong if plotted vs materialcoordinate system
1914851
Error in Sketch constraints after plotting un-displayeddrawing sheet
1916880
Dimension changes in NX8 without reason
1918104
Thread with "Move Object" Feature not possibleto move, too
1922140
Routing Port does not move with path when using deformablepart TODO:VIS
1922502
Lightweight representation icon shown when no geometryin JT file ref set
1931502
Surface Finish Symbols do not migrate correctly fromIdeas to NXvia CMM
1933385
Added support to translate the smart lightweight viewsusing 2D Exchange translator
1936453
CMMIdeas: Surface Finish Symbols do not migrate correctly
1936845
Surface Finish Symbols are not migrated correctlyvia CMM 8.5.1
1937024
Surface finish symbols do not migrate correctly
1939250
Sheet-Metal-Expression "Sheet_Metal_Neutral_Factor"locked when change material
1939354
Section function fails at sectioning of Sheet Bodywith bad data quality
1940563
CAM NX.8.5 - FloorWallMill - Use Exact Inconsistencies
1941064
Assign Corner - Mitre_Copeis grayed out in some routing mech.sub-applications
1941448
Provide faster access to reference dim option
1942299
Special signs in UDE-optionscauses error when MKEconfiguration is read
1945025
Bolt Circle Centerline doesn't work correctly withExtruded holes
1945926
A deleted or invalid class id was used when attemptingto Remove a SplinePoint
1946314
The performance of dragging SplinePaths is slower in NX9 v NX 8.5
1947203
Cylindrical dimension with baseline attached to a2d centerline
1947660
BSHCheck-Mate - order of features in error stack
1948276
Molded Part Validation shows radial crossover facesas vertical
1949117
Assembly components disappear in the graphics window NX after stepimport
1949266
NX7.5 tool path fails in NX8.5 when stock is negative
1949429
ZLevel, Tool path shifted unexpectedly
1952503
Get "The following circular update was detected:"but no more during update
1953743
Pattern did not show all details
1954588
Editing splinepaths of a harness created in NX9 is very slow
1954601
SplinePath editing of some segments in an NX8.5 harness is slow
1954615
Attributes on Datum CSYS
1956064
Simplified thread display in Drafting is incorrectwhen partially hidden
1956347
Wrong dimension value when associating the dim tothe boundary of a detail view
1956365
Export flat pattern should allow to export curve toa chosen layer
1956523
Incorrect angle measurement after geometry modification
1957897
Open and Update JTfacets by NXOpenwithout existing PRTneeds excessive time
1958439
Update performance is slow, also get errors in logfile during update
1958492
Stock is not displayed correctly after applying MiterCorner
1958981
Multiple Blocks with the same Name exists after using"Canned Cycles" in Postbuild
1960208
Crosshatch of exported DXFis on the wrong position
1961748
Missing surface data when importing CatiaV4 .model file
1962995
Smart lightweight views with dashed hidden line arecreating huge cgmfiles
1963865
Surface finish symbols do not migrate correctly
1964099
Gouge Check - unreasonable increase in processingtime
1964177
Wrong dimension orientation by creation with method-Hole Callout
1964498
Weld point command with option overlap calculatesthe reference sheet not always
1964791
Hang appears to occur when creating PMIDim in a particular view
1964816
Regression: System hangs when specifying hole dimensionin sketch
1965019
Context sensitive help cannot be displayed for SussmanBathe or Shape Memory
1965092
Out of Date Status after Component Replace in ANT
1965800
NXcrash - creating a Hole feature
1965870
Active Feature Group gets lost
1965876
NXSession hangs while creating PMI-- Radial Dimension with static wireframe
1965894
Delete of the "New..." row in the ProductInterface
1965948
Extension Line of linear dimension points wrong whenface is selected
1966017
PNTtree do not open if a JointMarkfeature is selected
1967696
Electrical Routing: Missing Tangency created AfterWrong Point Deletion
1967736
NXOpen.Display.DecalBuilderneeds multiple Commit()call for correct orientation
1969527
Custom Symbol color not displayed correctly
1969815
Zeros are displayed in the Surface Finish Symbol'safter migrating with cmm
1971193
This CP will fix issue to load custom item type propertyvalues in ANT
1971250
Associatively of datum lost after suppress_unsuppressfeature
1971862
Copying a sheet brings up Errors
1975114
Added support to translate the smart lightweight viewsusing 2D Exchange translator
1975133
MTDsimulation with PP created in NX9
1975385
Cannot copy an existing operation - internal error
1977380
Intersection curve consists of splinesegments, only
1977762
NXMotion Export: Wrong VRMLAnimation in result file
1978845
Wrong holder collision detected in operation calculationand ISV-Simulation
1979409
Part Module: Change Feature without make Part Moduleactive
1979507
ug_udfsincorrectly transforms sketch and ignores parameters in rotated frame
1979836
Added support to translate the smart lightweight viewsusing 2D Exchange translator
1980390
Angle dimension failed
1980419
Part CleanUpdelete Geometry
1981720
Zeros are displayed in the Surface Finish Symbol'safter migrating with cmm
1982792
Operations from the first setup get an update if OverridePosition is selected
1983329
KF%ui_comp_selectiondoesn't keep objects reliably using OnInitializecallback
1983845
Tiny Linear Moves in ZLevelProfile
1983846
Tiny linear move in Planar mill
1983847
Tiny Linear moves in Cavity Mill
1984397
PartFamilyCOM error
1984811
NXOpen::Die::DrawBeadBuilder::StartPoint::SetPlaneneeds ug_die_designlicense
1985511
Deformable Parts are not working in NX_CAMbut are able to select
1986114
Single Sided Dimension not maintaining its "side"
1986434
PMICylindrical Dimensions have additional leader lines when a face is selected
1986483
Too many RCPsafter deleting a segment of a path
1986565
Depended features of linked updates
1986593
Part Module: Unable to Pick Datum outside PartModulefor internal Sketch
1986814
When I set the Generic Post placement I get memoryerrors when placing part
1986929
PMICylindrical Dimensions have incorrect leader lines with user defined plane
1988104
Unable to keep saved and unlocked toolpaths
1988387
Cannot select face with specify plane after addingnew set
1988505
Simplified thread display in Drafting is incorrectwhen partially hidden
1989295
Display in Views only if a new Model View will selected
1989491
Pattern Feature (Circular) does not work as expectedin NX 8.5.3.3MP4
1989862
Extracting edge from surface is incorrect
1990587
Marking lines
1990658
Placing profile cutout takes too long time
1990749
Changing parameter consumed a lot of time
1990992
ugnx_caemigrate_tcfails to convert old CAEmodel objects to new CAEmodel
1992087
A registered save part callback can no longer be usedto save another part
1992090
Save of transient context ASMrequired, even for some non-associative & Position
1992418
Electrical Application: MoveRCP_MemoryAccessViolation
1992422
Routing Electrical: TooManyRCPs_NewScenario
1992923
2D exchange creates unwanted hidden lines in views
1993237
Combine results command issue when performing productsor divisions operations
1993352
NXPartfile doesnot open
1993412
Second refresh view in drafting cause wrong hatchingfor thread connection
1993446
Doppelte Verrundungenim Flat-Pattern
1993534
Undo-function has no result on retain PMI
1994309
Coloring of leaders with type Datum at PMI
1994460
Toolpathhas Circles inside by using Motion Output "Line" when ContactData is O
1994657
Multiple break out sections cause display problemswith Exact view
1994661
Hidden geometry is visible in an Exact Section View
1994690
Missing geometry after DXFimport
1994852
NXtakes long time for an edge selection.
1994867
Bend radius not changed after changing Sheet MetalPreference
1994925
Broken Interface Links
1995028
Extrude of a 2 circle profile to a conic pipe (asa flagpole) give incorrect res
1995318
Part Cleanup run create timestampproblem
1995381
Broken Product Interface Links
1995412
Check Mate Connected Part Check fails
1995455
Transform did not work as in previous versions of NX.
1995456
Incorrect positioning of a Datum Feature Symbol leaderon a circular centerline
1995474
This issue was when two concentric circle or arcswere used as input to create the 2D centerline, we created an approximatearc in between, and hence the dimension values were slightly off
1995535
Feature Playback failed in NX9.0.1 in NX8.5.2 it works (2)
1995544
ChangeAngle.prtFeature Playback fails in NX9.0.1 in NX8.5.2 it works
1995774
New part family configuration could not be createdresults in comerror
1995823
Lightweight move collision detection not working forcertain JTs
1996112
Replace Font with character font utility - cause moveof a text
1996187
Import Part imports an old version of the componentloaded in session
1996473
Law Extension Self Intersection
1996714
Unable to edit and reattach a constraint
1996781
Reordering of Features results in wrong timestamp
1996783
Missing split view for linked objects
1997428
Part import with reposition leads to exception error
1997453
Wiring slow performance to edit splinesof 85 harness in NX9025
1997488
NXdisplays different object direction in linked part
1997625
Changing settings of view raises error: "Settingsare rejected because one..."
1997635
Interpartupdate does not catch 'out of date' links
1997648
Links lose references after synchronize
1997703
Inconsistence of body selection in link edit window
1997890
Place Part Query
1998095
Feature Vector Malfunction Selection
1998118
Law Extension with Folded Surface
1998235
Assembly opens as modified, even after repeated savesand updates
1998364
Move command is inconsistent with respect to Datumplane
1998413
Show_Hidedoes not work in specific scenario
1998417
JTimport delivers wrong orientation of parts
1998420
Product Interface selection is wrong from Part Navigatorand Graphics
1998521
Internal error in WAVE Geometry Linker
1998549
Lock perpendicular Leader for text not working correctly
1998551
Null Tag error from remove splinepoint after detach a spline
1998596
Orientation of parallel dimensions changes after viewupdate
1998689
Fine Finish Offset in Turing produced wrong Toolpath
1998741
Export to dxfmissing values and dimensions
1998774
Unable to get Reverse Direction option on Baselinesto appear
1998805
Change in the parent part is not shown as Out of Datein linked child part (PNT)
1998878
Need API'S to access Alert messages that are providedduring weld edits
1998890
Parent of broken expression listed as not loaded andhas wrong status
1998901
Pattern Curve in Drafting does not update when countvalue is from expression
1998927
Change the selection priority of product interfacebodies
1999032
Replace Feature makes link 'Out of date' and SynchronizeLinks shows 'No Change'
1999035
Clone "edit existing assembly" internalerror
1999092
Horizontal dimension are incorrect
1999100
No complete hiding of initial feature after extractbody
1999129
Body measurement does not update automatically whenmaterial is changed
1999130
Incorrect out of date ANT column value after replacecomponent
1999154
Nastranimport including MaterialdataNX 9 vs. NX10
1999165
Wrong results for profile endcuts
1999211
3D Tetrahedral meshing of the part is not possible
1999215
Wrong update status with wrong synchronize reason
1999224
PdmSearchSimple causes the TCNav to erroron a simple search
1999226
NXObject.HasUserAttribute()returns unexpected results for attribute arrays
1999233
Cannot save part after creating render set by NXOpenwithout drawing view
1999277
Updating legacy weld elements individual
1999279
Open by Proximity not working for certain JTfiles
1999286
WAVE Update very time consuming
1999295
Update to End takes longer than in NX9.0.2
1999301
Make Current Feature is slower than NX9.0.2.5
1999319
Open CAPI UF_DRAW_ask_render_set_parmsand Wrapper fail with NULL_TAGinput
1999503
Regression on exporting NXto DWG
1999528
Fit Method Curve Quinticcreates wrong open curves when extracting edges
1999537
KF%ui_comp_selectionOnInitializefails on NoHostPointerwith fix of 1983329
1999673
Law Extension Gap
2137349
CSW: Retained 2D centerline mark is displayed at the absolute origin
2137927
CPJ:The result of 2Dexchange is not correct when drawing have UserDefinedSymbol
2148879
NX7513MT-Part_Open_Error, Cannot open NX5 part in NX7.5
2150055
Inconsistent results observed using Place Part
2155147
CPJ:Internal Error occurs reporting stock information
2163939
HNS-TWS2 Redefine "Stock offset Point" vectordirection causes Internal error
2164397
HNS-TWS2: Replace 2 occurrence of a component raisesan Internal Error
2165932
Routing: "Overstock" deleted when I "Detach"and "Move" path point
2167015
i-Test : Radius Dimension is not placed correctly
2167956
An internal error occurs when the user moves the customsymbol
2173887
Routing: Cannot determine type of stock for specifyitem. Dialog will not launch
2182328
CPJ:commentsin "uf_object_types.h"are insufficient
2184729
Inconsistent view display when executing "InvertShown Hidden"command
2195219
2d centerline only half display in NX 8 with GCtoolsenvironment
2197682
After play macro the color block dialog is gray
2198372
Line Arrow configis not used dimensioning to centermarks
2201567
Posting output shows mom_contact_pointerror in NX7.5
2204645
Can't perform additional bend to the existing Runin sub-assembly of routing app
2205140
uf5947 consumes memory and does not release it
2206496
CPJ:Cannotremove a placement position when edit master
2206865
Transform path disconnects the segment from path
2211849
Minutes to Delay option does not work and "BatchProcessing" runs immediately
2215177
Splinepath cannot be moved by Transform path
2216781
Surface Finish Symbol of .ascfile imported into NX8.5 is different with NXI6.3
2218055
Internal error occur when I detach the path point
2218282
C9 Need "Show as Reference Dimension" optionin "Textâ200235 hotspotmenu
2218340
Tolerance setting list in popupmenu does not have "Reference"
2219922
NX8 has stopped working
2220089
Transform path moves routing objects partially ifother command is used in b_w
2221345
The control character of Note appears by "2DExchange"
2222403
Dimensions move by "2D Exchange"
2222405
Target: Select Body is missing a selected object isconsumed by another feature
2222514
Unable to transform path by selecting the RCPat bend
2223446
Splinepath point get created in incorrect position
2223719
Customer would like to edit Jog by using shift keywhen editing the Ordinate dim
2224311
Added support to translate the smart lightweight viewsusing 2D Exchange translator
2226256
CAM: Teach the meaning of the message outputted byCreate Feature Process
2226295
Display Springbackand "Output SpringbackFacet Body" give unexpected results
2227008
CPJ:Internal error occurs when a point from splinepath is removed
2227411
NX900-EAP2:Rapid dimension command falls
2227996
LawExtensionoutputs wrong result on NX8.5.1mp3
2228587
Save response is unusually slow
2228589
Bend Relief is not created by Convert to Sheet Metalcommand
2229228
DrawingUpdate causes Datum Feature Arrowhead shifted
2229331
Leader is changed, when tryedto change the style of datum feature symbol
2229335
NXfreezes when creating sketch dimension with selecting point of datum CSYS
2229408
Creating Branch Path is caused Internal Error
2229417
SplinePath options failed
2229425
About move of "Custom Symbol"
2229795
Remove point of SplinePath with Built-in Path component
2231384
The Drafting Standard is not applied to the new componentpart
2231549
Molded Part Validation results differ in differentversions of NX
2231678
Assign Corner->Bend->Inner Radius gives incorrectresult for certain anchors
2231761
Routing: Null pointer supplied to Routing error occurswhile editing an S-Bend
2231762
NXcrashes while trying to create S-bend
2232056
Getting message "Could not get input entity'sclass" while using ugtopv
2232774
The arrangement position of Datum Feature Symbol ischanged
2232967
SMAttribute already existing on this entity message while translating JT
2232970
View dependent edit do not work correctly for "deleteselected erasures"
2232989
The broken Bend RCPis missing in NX 8.5.3MP1HF
2233315
COMerror 80010100 occurs in NX 9.0.0
2233554
The display of the facet body changes when the scaleis increased or decreased
2233784
Phantom font of section line is displayed like solidfont
2234302
CPJ:"COM errorcode 80010100" error is displayed in Part Families
2234546
When you import as the Real Dimension "FoldedRadius", position shifts
2235058
Batch Process does not work in NX9.0.1 and TC10.1.0.1
2235206
NX crashes while changing the stock diameter equalto adjacent diameter
2235411
Leader line does not switch the position, when slidea Text to left side
2235665
Can not exported to JT
2235795
User defined sorting order is removed
2236263
NX900_SZK_OD Selected point of dimension is shiftingwhile open drawing in NX 9
2236305
Spline shape is not reflected when changing ShapeType from Slack to None
2236564
URG:Connectorsrotate while fixing path length
2236612
The editing contents of the "Custom Symbol"are not reflected
2236655
A view label letter cannot be changed into an unusedletter
2236665
Internal error occurs when a spline path created withslack is edited
2236957
iTest: Adding a path point causes an update erro
2237709
Autoroute fails in Electrical Routing NX 8.0.3: "Stocknot found"
2237830
A part cannot be opened with an error "'A deletedor invalid class id was used'
2237851
Batch Processing does not work in NX 8.5.3 and TC9.1.2.4
2238399
The length of the path gets longer than length betweenPorts
2238690
CPJ-VUP: UAF Failure(NX 9.0.2.2) Update warning forConvert To Sheet Metal
2238751
When export the dxf format, position of view is different
2238803
Exactly the same checker is not identified in NX 7.5and NX 9.0
2239326
Revolved features and the Tool body are created whengenerating the operation
2240126
Resultant shape of Convert to sheetmetal differs fromearlier versions in NX 9
2240189
When the spline path is subdivided ,Space Reservationis deleted
2240291
When united component is selected in PNT only targetbody is highlighted
2240560
NX crashes while creating a connected splinepath with space reservation
2240574
NX crashes while subdividing a spline path withspace reservation
2240989
The tool and the holder collisions occur by using3D IPW
2241153
When existing sketch is modified and switched to AdvancedRole -Internal Error
2241162
Unable to hide tabs in blockstyler through hide method
2241172
Error recovery completed for the following error,while to plot TIFF image
2241246
File in use by another process error occurs whilesaving part file
2241318
Memory access violation When trying to change therole to "Advance"
2241356
Density value "1e-006" or less cannot beset in Customer Default
2241431
Incorrect Unbend output for cascaded Sec Contour Flangeon curved edge
2241487
Invalid Hem flange output
2241894
Show hidden objects in comp with Ctrl+St+K (Show SelectedObjects) not working
2241920
NXOpen.CAM>CAMSetup>TiltToolPaths() gives anexception as "NX error status: 1"
2242262
Law Extension face has a large gap than tolerancevalue for the input curve
2242291
Cannot create single sided Cylindrical dimension withouter dimension arrow
2242338
Selection intent of Trim Curve disappears inediting
2242373
Cannot create Jog to Linear dimension which is createdfor '0'mm distance value
2242385
Law Extension:Change distance tolerance,aftervector is reversed
2242392
Some commands cannot be found in Japanese env
2242424
Hem Flange does not work on specified edges with "MaterialInside_Outside"
2242635
If the display of an object is changed, it will bein the status of OUT-OF-DATE
2242764
In , facet's Shading displaychanged
2242938
Spline path's shape type 'Lock length' gives incorrectresult
2243057
NX 9.0.2.5 Power drafting issues after import of AutoCADfile
2243201
Match Edge gives error as 'unable to build surface'when ref edge is a line
2243238
Shipbuilding weld seam, drafting command doesn't work
2243565
CXPOM_wrong_class Error occurred while creating setupin NX CAM
2243707
Ordinate dimension-> Place Automatically behavestrange after drag dimension
2243819
The name of "Expressions" is not normallyreflected by "Reuselibrary"
2244840
UF_DRAW_set_view_display is failing to set hiddenline width as Original
2245086
Holes are not created when we do with outsidework part as Tool
2245493
NX cannot change History-Free Mode by Internal error
2245777
Reset occurs to Transparency of solid body when usingthe MPV
2245948
&CSLANT does not control text angle for NX fontcreated in NX 9
2246125
The thickness inputted as formal has changed to theconstant
2246501
When Descriptive Part Name Style is changed, PartNameof PartList isn't correct
2246708
It is very slow to opening a motion data without loadingits child dat
2246872
NX 9 hole table does not recognize all holes
2247291
When I execute Part cleanup to drawing part, NX changeposition of Note
2247292
When I execute Part cleanup to the drawing part,NX break Note
2247496
Update Error occurs by "Merge Module"
2247508
Notation difference in a filename extension pull-downat import I-deas ASC_DWG
2247535
Drafting element is selected unintentionally
2247548
Unable to merge facet bodies by Merge OverlappingFacet Bodies
2247593
NX display line of spline that is made by studio splineon the drawing
2248072
The created trim length exceeds "Minimum Length"value with the warning message
2248291
Cannot select lines after export 2D part with no associativelyto 3D part
2248471
Alert indication is not displayed in PNT though parentbody is missing
2248732
The behavior of Check Regions of MPV
2248810
Unable to convert all drawing sheets to IGES in NX8.5
2248814
NXOpen C# Wizard creates external (batch) programthat will not execute
2248853
ExtractFaceBuilder.CommitCreateOnTheFly throws anerror
2248905
Wrong translation for "OPEN" in Reuse Library
2248909
Copy Template as New Design in Reuse Library is nottranslated
2248936
UDF body color display changes when inserted
2248971
UGMASTER is not assign when saving as New Item withAutomatically Assign option
2249161
Attributes using expression from Reference Text becomeincorrect Value
2249327
The name of body changes by split body operation
2249328
The element in the non-indication layer of UDF isdisplayed
2249356
Process of creating a dimension using "Rapiddimension"is slow
2249493
Cannot able to select the same dividing object datumtwice in "Divide Face"
2249504
Angular dimension is changed when execute plot
2249529
When exporting 2D to autocad, balloon circle disappears
2249546
NX output wrong result with node information
2249857
Can not save the suppress information when save drawingfile
2249910
NX crashes when double click on "Expression Check"
2250055
The Vector arrow of Ribbon builder is not displayed
2250205
Problem when inserting in the expression including2byte characters
2250337
Extra NC path generated in Flowcut
2250351
NC path twisted in particular area in flow cut reftool operation
2250474
Non Uniform NC path generated in flow cut referencetool operation
2250476
A extruded tool path is created
2250573
Dashed line changes to a solid line by NX Plot
2250687
In Transform, Mirrored Lightweight Body's (JT) normaldirection is inverted
2250705
Law Extension create incorrect surface withouterror
2250808
Exceptions occur when ug_body instance uses 0 forcolor in NX 9
2250942
Engage of non cutting moves is cut over
2251030
Adjacent spline path's shape gets changed when double-clickinga spline
2251097
Inconsistent about the display of SubCategory in MaterialInformation
2810191
Ballonsdon't update during the update of a part family member
6248511
Bend taper fails if applied to bend on bend
6305080
Note linked to an interpart expression rounds differently
6386183
Datum associated to stacked FCF produces gap
6400356
Geometry Linking Failure
6424822
CenterMark referencing ThreadCircleSymbol will beretained in update
6472032
Center marks become retained after updating view
6487324
Invalid section string definition
6496575
It is copied by wrong distance
6498114
Unable to create angular dimension
6498459
Routing: Neither endpoint of segment near RCP
6499312
Internal error during transform path
6502266
Angular line at current segment option not applyingFine Finish Offset correctly
6559724
Dimension missing gap on centerline
6561267
UDF with Feedback expressions - Apply does not createnew expressions
6566556
Retract move not in Inverse time (FRN_G93) feedratemode. Engage and Cut are
6570966
Fourth axis limit violation fails and then outputsincorrect A word
6603636
Planar Profile tool path is not following the pre-drillpoint
6631793
Linked ports created by filter setting Face_Two Linesare not have associatively
6632138
Assembly Exploded View Trace Lines do not translateinto sidecar.jt
6634232
Drafting dimension extension line gaps not reliable
6647078
P8.0.1 - Transform path on routing branch removescorner bends in other areas
6681423
Routing corner angle dimensions are off by small amount
6687752
After generation the main dialog has a new option'Verify Pre-Drill Points'
6700641
Unable to use function "Path Length Annotation"-partof Drafting module in NX 7.5
6713291
Show = False on a Tab Page hides container items ratherthan the Tab itself
6717554
After execute Import Bend Radius Table command, itcould not find Bend table
6718129
If segment end RCP selected on Transform Path, itwas moved only RCP
6718165
Number attribute value rounds when added as a relationshipin the Note editor
6718800
Replace Stock is not working if overstock createdonly with Routing connection
6720314
Incorrect stock display for Transform Path from onerouting path RCP to other
6720951
Transform Path is not working for distance value measuredby Measure distance
6723898
Cannot use Discontinuity RCP as path start point
6725087
Post builder; not getting circular moves output forG18 plane
6732556
When creating a formboard get the message "anattempt was made to associate ....
6745860
Define Run-> Member Items does not auto-selectPath
6747193
Tabular note cell text is not updated with attributevalue after import part
6751549
Transform path- incorrect results moving "TEE"& branch along path
6754338
Radial Bend is leaving connector and removing stockon Formboard
6776759
The same title cannot be used on two different attributeserror opening assembly
6783887
Transform Path move or copy does not succeed on entireharness
6787919
Unable to open part file due to same attributes ofdifferent type
6792884
Empty line is removed from posted output file andwhen viewing in synch manager
6796983
CenterLine is not adjusted to manual boundary
6802602
PMI Datum Target: Symbol leader not associative topoint in assemblies
6816157
Routing Length: "The same title cannot be usedon two different attributes"
6832974
Rotary axis incremental and sign determine directioncauses wrong output
6844669
Spline path end node hanging when using Control Din Routing
6851770
PrintPDFBuilder Commit fails when used on a non-displayedpart
6857961
Routing Run Nav Place Part not handling attributescorrectly
6867051
Incorrect results from Check-mate "Report Featureswithout Children"
6873282
Predrill Start Points order not followed in PlanarMill Profile operation
6878962
Ordinate dimension will not associate to centerline
6879827
Boundary order not following Region Sequencing ->Follow Pre-Drill Points
6880816
Check body not being recognized. Tool is cutting throughit
6886712
Error saving JT: Failed to import remaining data fromforeign multi-CAD file
6888187
Documentation specifying nx_pmi_attribute leader_leadersleader_value is vague
6888421
Reference style on tolerance pull down for dimensionedit
6891680
Autoroute fails in Electrical Routing NX 8.0.2: "Stocknot found"
6892275
Transform path on a RCP creates unwanted edits
6892318
Adding Bend causes undesireable edits turning Transformpath
6893189
Convert Legacy Spline to V9 Spline on Selection forEdit
6898282
Mechanical Routing: Transform Path not updating editedpath as expected
6907497
Dimension line passes through appended text when dragged
6910642
Transform path affecting paths down the route
6910694
Transform path does not dynamically update paths
6925479
Customer Default "Teamcenter Ship Name Format"option for Item Name vs ID
6932644
Lock axis with right angle head fails
6938319
Predrill Start Points order not followed in PlanarMill Profile operation
6939350
2D Centerline used to dimension Flange radius sendsleader endpoint into space
6940940
Possible values for mom_rotation_mode incorrectlyshow ANGLE instead of ATANGLE
6942194
Getting incorrect results on stock bends when transformingpath_stock
6955239
Law Extension Builds out of tolerance with no warningor alert
6962826
Null tag not allowed to edit ordinate dimensions
6968811
NX 9.0, Edit Spline path "Detach" is notavailable
6972365
Part Cleanup (Delete Unused Fonts) changes the SymbolFont File Font
6976274
Routing stock inverts at bend corners
6980142
Unable to open CAM file in NX 9.0.2 and up
6987003
Routing Assemblies are Modified when opening in thecontext of a Reuse DE
6987730
NX 9 Drafting save Work Part only. takes about 1_2hour
6988503
Circle_Helix moves are not linear moves in NX 9.0when 840D UDE Compressor is ON
6988562
Adding support to translate the smart lightweightviews using 2D Exchange translator
6991672
Opening a JT file, what defines the units _ compsare scattered
7001160
Part clean up "delete unused fonts" switchesthe symbol font
7104392
No information on mom_operation_has_path variable
7112865
Exporting face mills to update libreffails to update - creates new libref
7121536
If a block template name begins with a number, NXissues a parse error
7127193
NX Thicken not removing Gashes
7127252
Routing Electrical - No tangency created when creatinga branch path
7127258
Routing Electrical - Extensions at fixture ports cancause RCP to be offset to e
7127261
Routing Electrical - Duplicate RCPscan be created when connecting one spline pa
7127797
SMEbridge curve UI dialog memory issue
7128731
Engage going opposite direction when comparing NX7554mp10to NX9013
7131552
Export CGMor Save drawing CGMdata is creating large files
7132153
Fixed contour operation cut region tool collisionavoidance gives internal error
7135193
Internal error Subdividing a path that contains Slack..
7141930
Excel automation comerror code 80010100 creating part family
7149735
Update formboard will not save last update
7151420
Unable to export PLXMLnetlist
7151453
SIMPLIFY PART HAS UNEXPECTED RESULTS
7153468
PDF Export of Drawing has extremely poor performance
7155067
NX: Part is showing "Missing Reference"alert after interpart update
7158156
Tool path lock remains locked in current version
7159379
Given object does not have the required csysmatrix to create angular dimension
7162788
NX 8.5:suspect geometry warning with no tool motion;nx8.0.3 has tool motion
7162958
Raster image causes Internal Error when creating PartFamily member
7166681
Reusable object created result in user defined expressionname lost
7166980
Smart Lightweight view performance issues
7170902
Import plmxml files into Electrical Connection Navigatorcrashes NX.
7172711
Properties attribute column width is not maintainedif modified
7172738
Contour profile operations will not generate; operationterminates
7172867
JT_NX mismatch in component positions
7173718
Surface Finish symbol exported to JT is rotated
7178300
NX 8.5.3.3 MP1 plot generation take an excessive amountof time
7179210
Editing a datum feature symbol creates unwanted Jog
7179278
NXMGR: Replacing assembly part family template withmember gives error
7179528
Relations and Interpart link browser fails to showlinked curves
7179535
NC: Unable to open file in NX 8.5:null tag not allowedafter upgrade from NX 6
7181152
mp6 udf fails when changing udf scale from 2 to 1
7182280
NX 9 Routing Spline path conversion performance
7183415
Creating a hole, sketch csys goes to last hole created.
7185242
DWG file in NX 9 is not maintaining layers - everythingis placed on layer 256
7185561
NX- Legacy material Library Issue - read error
7185734
No link status change after PI name change; can'tupdate
7186716
Datum CSYS reorient will not recognize arc centerpoint snapping
7186912
HD3D pop-up for Analyze Pockets has incorrect spelling- information
7187083
PMI - Section curves of Lightweight Section disappearwith the solid
7187490
Optimization & Sensitivity fields snap back totheir original size
7187890
Scale value disappears with customized view label
7188549
KF FrameXY issue in ug_udfs in NX 9 versus NX 8
7188966
After using Adopt Existing Object, error creatingnew part
7189340
Elec Lock Length on a spline moves the component
7189438
WELD ISSUE - Welds failed MDM Consistency check
7189444
WELD - CFF no longer lists previously Connected partnumber
7189451
Unable to select legacy welds to Export CSV
7190075
Mirror feature - unable to recreate feature ownerdeemed the feature failed
7190132
Crosshatch Settings dialog is not closing (open directory)handles
7190615
UF_PART_reopen() does not post confirmation dialog
7191032
NX-View Updates in Drafting
7191225
IPW 'out of date' status is inconsistent
7191819
NX 6 Environment Variable
7192308
Routing assemblies cycle through updates to featuresof loaded part unexpectedly
7192332
PMI Custom Symbol leader arrowheads detached in JTexport
7192996
Save All should only save all showing in the previewlist
7194290
NX allows checkout of "out of date" subordinateDE's
7194313
No Alert is issues if Weld Point is not on the topor overlap sheet
7194316
Linked Face created on the fly are not put on thewelding construction layer
7194335
Drawing Revision block (Tabular Note) updates positionin TCIN but not native NX
7195365
PR7489819 Linkpmi fails to finish PR7195365 Use prototags to find underlying geometry
7195452
Line Profile FCF applied to multiple curves in PMIproduces incorrect CMM tol
7196000
Published Welds are removed when file is saved withoutpublish option checked
7196005
Welds re-publish to Teamcenter with new ItemID withouta change to NX weld
7196474
Log is displayed even after using UF_CLONE_set_logfile(NULL)
7197259
Lock length changes the Shape of subdivided splineat the takeout point
7199952
KF adoption different in NX 9 than NX 7.5
7200065
Cannot create a single scan path XSECT pattern
7200157
Edit Parameters with Multiple Feature Selection forcesall Active Features
7200243
batchShadeOptions crashes JVM the second time it isused
7201310
GetEvaluatedText throws "Second parameter isinvalid" NXException unexpectedly
7201418
TORUS MINOR Diam shows 'Failed' in Measured Statuscolumn but actually passes
7202422
Part file opens in NX 9.0.2.5 but not NX 9.0.3.4
7204075
Electrical Cable editing is excessively slow in NX9 when slack is applied
7204201
Adding slack to a cable in NX 9 takes WAY TOO LONGcompared to NX 8.5
7204218
Importing CGM into a Front view breaks apart the CGMdata
7204219
Creating a spline path the performance degrades afterselecting multiple points
7204248
Top level assy structure is wrong after UF_UI_ask_open_part_filename
7204727
Selecting Named Centerline produces inconsistent results
7205173
Unable to delete reference object in layer createdby View Alignment
7206011
Added Wire EDM Tool - Verified the Path - Path cannot be edited...
7206025
True shape customer defaults need honored, shouldnot be controlled by registry
7206111
Customize button on the radial toolbar and it doesn'tstay after save user role
7206387
NX 6 to NX 9.0.3.4 MP1 Turning "Cut Region"incorrect when regenerated
7206451
Opening a previous version of an assembly deletesoccurrences in TC
7206498
Search in NX Manager is displaying wrong results,attribute is boolean
7206903
Export IGES and is missing sheet 2 and later, onlysheet 1 exports
7207057
Thread Milling Instances Lose Feature Geometry
7207275
UNLOAD_WIRE & LOAD_WIRE output
7207276
Standard Part Management Drawing Issue
7208090
Syslog shows "Couldn't find object for"errors for check-mate checkers
7208817
Corruption: Manufacturing part file cannot be openedNull Tag reported
7208841
Creating Part Family members crashes-COM Error - 80010100
7209357
WAVE Out of Date column has a Sys Delayed Link Outof Date on Layer 1 and 27
7209392
Moving from NX 4 to NX 9, wave links are broken
7209667
Hidden sketch curves don't display when Editing aSketch
7209788
KF - different behavior in NX 9 than in NX 7.5
7210519
Moving from NX 6 to NX 9 and output rotation in DPMin NX 9 is wrong
7210780
Suppressed Drafting Objects Displayed in DWG Exportin NX 9
7212173
Memory leak in NXOpen API involving annotation associativelydata
7212277
EvaluateAnyAsString throws "Internal error: memoryaccess violation"
7212599
Tool Axis specified as 'Vector' not maintained inan MCS when re-entering dialog
7213425
Linear dimension does not connect to Baseline
7214318
Absolute function is ignoring the unit it has beenassigned
7217444
Existing Validation Results Summary (VRS) Is Not Updating
7217464
Differences between NX 8 versus NX 9 trim vector directionlocation
7217705
NX Shape Search error with UGII_GENERATE_MULTI_CAD_JT=1
7217767
NX takes a long time to accept the selected featurethat was picked
7218446
PMI light weight section not update when rotated abouta point
7218517
UF_UI_ask_ribbon_vis & UF_UI_set_ribbon_vis don'twork for Groups
7219284
UGMGR_Remote_cico Customer Default is ignored
7219549
NX: Flat Solid fails and Cleanup Utility does notresolve
7219655
Harness Un-Routes when running 'Part Cleanup' withthe "Clean Routing Objects"
7219749
Specification drawing fails to load due to 630035null tag error
7219767
Electrode Design: Patterned components have suffixesduplicate in BOM
7219944
Send UGMaster dataset from TC to NX result in modifiedbut no check-out state
7220673
WELD - CFF unable to select face
7221407
Electrode Design - BOM issue
7222200
NX: export flat pattern does not keep layer settingsfrom preferences
7222326
Trying toplace a component in Routing Electrical, OK not available
7222627
mqc_drawing_askViewData does not return correct infofor label and scale on_off
7223654
IPW not updating, ONT column does not show IPWs asout of date
7224120
Deformable Part not functioning properly in NX 9.0.3.4MP1
7225295
Progressive die wizard Collision check problem
7226331
AFEM update resulting in Internal Memory Access Error
7226332
Unable to delete certain features
7227078
Macro playback fails when menu has a nonselectableseparator line
7227259
Notes linked to IPE are not updating when parent filesin Excluded state in NX 8
7227981
Reposition Component (legacy) - wrong results whenusing fractional input
7227986
File fails to open
7228118
Parallel generating hangs NX
7228212
Manufacturing Assembly will not open in NX 9.0.3 butdoes in NX 7.5.5
7228330
PMI Custom Symbol translates to jt incorrectly
7228885
Export of a SE drawing using DXF_DWG into NX is poor Line twotimes in Runner,appear Internal Error
7230663
Offset Face feature doesn't display ! in PNT whenneeds attention
7231190
Importing a JT file stacks all imported solids ontop of each other
7231606
Internal memory error when creating face on mesh
7232084
THREAD MILLING - operations getting flagged as editedwhen retrieved into NX 9.0
7232482
Not able to create XML output on a single part
7232506
Excess Material is not taken over into XML Outputfor straightbrake parts
7232686
Error adding exploded view to drawing
7233945
What is "Nose Angle" on Customer Defaultscontrolling
7234393
Dialog popping up Performance of almost all Manufacturingfeatures are very slow
7234476
KF mqc functions for reporting template of familyinstance report wrong value
7234532
Plate preparation on Planar parts need to be at theend of the feature tree
7234573
Smart flag isn't updated correctly
7234638
Plate preparation is not working on some Straightbrakeparts(Not making it flat)
7234648
Textblock Position in XML output is sometime not correct
7234953
CAM tool axis vector in MCS object not retaining afteredit
7235014
When the revision rules are changed variant rule isdeleted_cleared
7235599
Shiptools placing profile_plate returns Unable toapproximate guide string
7235637
3919 Extension does not save the effectivity set onDCE
7235745
Spline paths change significantly when they are convertedto the New NX 9.0 spl
7238319
Check-Mate results are not getting updated after upgradefrom NX 7.5 to NX 9.0
7238823
NX Edit Boundary NX 9 replacement is not compatibleto the NX 8
7239696
Accidentally selecting Inspection module locks userout of CAM
7239705
Cannot disable menu items in NX 9 using UF_MB_set_button_sensitivity
7240036
Mold Wizard - tooling motion simulation run the secondtime fails
7240515
Startposition for Cutcom is not usable when NO Engage_Retractis set
7240578
Auto Route in NX8.5 Electrical module fails to displaythe assigned wire stock
7240702
Creation of detail view causes "unsuitable OMobject" error
7244999
Teamcenter Naming Rule not used for PTS Parts
7245409
Symbol Font File is not loaded from Customer Defaults
7245475
Cylindrical dimension using baseline does not work
7245488
Not able to open part file in NX 9.0.3 -Plate preparation- directions are coplanar
7245509
Plate Preparation is not taken over the solid specifiedby METAFORM_LAYER
7245561
Null tag error when manufacturing XML output is created
7245578
Excess Material not correctly placed on the planarmetaform solid
7246100
UF_ASSEM_deform_part() fails with error code 580025
7246221
Question about Continuity
7246931
G2 Continuity is not updated correctly in 'Match Edge'dialog
7247038
PR2221699 was not fixed in NX 9.0.3
7247370
The vector of "Fixed Tool Axis" is not storedin MCS dialog
7247430
About the spline editing by X-Form
7248034
JT part not visible in drawing after insert base view(view from part)
7248110
Thread Milling hangs when selecting each hole
7248301
Excess Material is not working on knuckled plates
7248477
Move Object doesn't move associative text to specifiedlocation
7248545
Cannot de-select run members to remove from run whenworkset is displayed part
7248586
Identify command VKI Error Number 1 Function : vis_GroupSetEntFlag
7248854
Optimization setup gives a memory error
7248945
Electrode Drawing will not update to show the correctattribute information
7249382
NX: Performance Issue with sketcher or drafting dimensioning
7250527
NX 9 does not write Relative Transformation Matrixto TC10
7250615
REG: Simple Pattern Feature of Groove fails to updatein NX 10
7250649
Query conic edge blend parameters
7250725
Editing a Surface Wrap recipe checks out two "nx_adv_fluid_mod"licenses
7250904
UF_CLONE_perform_clone returns error code 720100
7250914
Error happens while output shop doc during the toolpath verification
7251156
Create interpart link option is not remembered byRouting Spline Path
7251175
Modeler error opening a parasolid file
7251203
CMM Inspection results do not match the results reportsfrom eM-Measure
7251305
NX 9 shows only 6 Error Estimates but NX 8 shows 7Error Estimates
7251934
Feed Slowdown in Corners value is not output intoCL list in NX903MP2.
7252286
Moldwizard cut pockets change color when componentis moved
7252306
LocalStorage not supported in NX9 internal browser
7252381
Can't delete leader line
7252915
To specify the boundary for CAM operation NX 9.0.3mp2takes more time
7253005
Tabularnote with "Evaluate Cell as Formula"-> no calculated value in DWG export
7253230
Imported mesh does not conform to CAD geometry aftermorphing
7253881
MeshName property does not set mesh name
7254351
Bead Weld ignores Construction Layer Preference
7254452
Flowcut-User defined cut order shows cut regions onpart before it was mirrored
7254620
Unable to add Base View in Drawing -> Error: Thereare no curves in the boundary
7254631
Empty Predefined View list if MW Assembly Drawingtemplate doesn't contain note
7254771
NX Part Family Assemblies fail in TcVis
7254795
Wrong View Orientation using Electrode Drawing Template
7254883
USER WARNING MESSAGE 2070 (MTRXIN)
7255393
Force load applied as a spatial distribution is incorrect...
7256378
File in use by another process error occurs whilesaving JT data
7256749
Rules Based Structure Welding Callback Requires WeldAssistant License
7256758
PatternFeature with boolean operation gives memoryerror when asking for bodies
7259032
Internal error when trying to open a drawing
7259085
Tool holder and IPW Collision in Cavity mill operation
7259542
NX returns an Internal Error when opening a drawingif the ugmaster is open
7259639
Element Modify Order does not work fine for the meshmade in the body with MMC
7259764
Wrong thickness of Belts
7259871
Save As dialog does not function when Item_id anditem_revision_id are mapped
7260083
Flow cut operation does not generate Toolpath withthe stepover value specified
7260263
ug_extract_curve needs info on UpdateAtTimestamp parameter
7260419
Offset in Face cannot create correct output
7260939
Customer Default "Teamcenter Ship Name Format"not working with Naming Rule
7261591
Order of commands of View Shortcut Menu is changedwhen restart the NX
7261643
Multi-CAD assemblies are opening as modified and beingmodified by update
7261964
PDW Tooling Motion Simulation Mounted does not getreset
7263544
Electrode Wizard Drawing template All Views have awrong orientation
7264204
No response from native NX Shape Search
7266198
Table field - Spatial map: surface gives wrong resultwith meter units
7267123
NX: Unable to open part in NX 9 - Error during Update
7268516
Component color change has no effect on sketch curves
7268524
Changeover Management doesn't change to second partwhen creating drawing
7268811
No locked tool path when opening a NX 8.5 holemilloperation in NX 9.0.3mp3
7269620
Cannot directly open parasolid file in NX 10
7269692
Square cut not working using Stiffener by support
7271613
Edit Spline Path results in Modeler error: coincidentcontrol or spline points
7272054
MEMORY_ERROR
7272544
Cavity Mill Corner Slowdown not working
7273528
Spline Path creation in NX 9.0.3MP3 does not haveparallel constraint
7273881
UFKf askListCount throws exception for an empty list
7274038
Freebody result on cross-section of rectangular tubeof solid elements is wrong
7274837
Interpart expression not being picked up causing componentincorrect orientation
7275351
Can not change the width of the column of "XYFunction Editor"
7275902
Enable Multiple Revisions and Load Interpart Data(alllevels) cause failure
7276241
'Extend at edges' in Flow cut reference tool generatesunexpected path
7276455
Questions about setup NX 10 Doc server
7276469
Can't edit appended text in text fields on Gwif forPMI dimensions
7277144
Legacy splines converted to NX 9 and perform transformpath results in broken spl
7277922
UF_UI_select_with_single_dialog() displays garbledJapanese characters
7278186
Analyze Formability odd Shape of Curves
7279064
UF_UI_select_with_class_dialog() displays garbledJapanese characters
7280728
Promote body with View Section command
7281152
NX 9 cam turning tools rotating in visualize to theproper orientation angle (OA)
7281186
Corner slowdown feed rates not being retained
7283638
Angular dimension is switching to incorrect valueafter performing edit
7283852
AssertErrorCode reports asserted error code ratherthan the one which was thrown
7285267
Tool path gouged the part in the combination of thebull-nose and Floor Wall
7285563
Textblock text still not correct placed with XML output
7285581
View Break problems with ShipBuilding Annotation
7287051
Object supplied is of the wrong type using partialloading
7288299
Lost customization when choosing "Save Role"
7288817
Tag Error reported after deleting Blank geometry ina Floor Wall operation
7289348
The symbol converted into DXF is not correctly displayed
P291752
NXOpen GetBendParameters() fails on Blend with Beadwith active Unbend feature
7292256
NX 10 Hole Table has 2 Through Holes rather than 1C'bore hole
7297361
Transform linear path in NX 9 breaks the connectedsplines fixed constraint
7303696
Error drill
7304633
Reverse direction does not work in spline path
7306094
Defect of "Suppress Hole" during 2D meshEdit
7306506
Lowest Save Z should be 3mm _ 0.1 inch for all holemachining operations
7307005
GRIP truncates object names at 31 characters
7307943
ELEC - Update_Delete has gone thru too many IterationsError
7309871
Surface finish symbols do not migrate correctly fromIdeas to NX
7311168
Export DXF option does not export the groups withgeometric entities
7311266
Excel does not close after "Cancel" in NX_PartFamilies dialog
7312187
Built in Path does not move with deformable routingharnessTODO:VIS
7314924
Routing Electrical Auto-Route Speed Issue
7317562
Internal memory access violation in Mold Wizard CheckRegions
7320011
NX_JT facet cannot fill out to Column of Commentin Part Navigator
7321443
NX routing hangs & freezes
7321459
Issues with 2D Exchange
7322223
When cloning the Motion object, an error occurs
7323208
Tool neck is not taken into account in Gouge Check
7323671
Replace stock command does not work for replacingoverstocks
7323850
Flow operation fails to find all cut areas when ref.tool is a button cutter
7324151
Coordinate Plane Label, create Height Specificationof an Air Duct_Cable Tray
7324783
Leader location of the labels having no text changeson view update
7324967
Post Builder does not store_lose canned cycles settings
7325314
Unexpected route line appears after deleting an elbowcomponent
7326604
Deform Part Shows both deform and undeformed body
7327280
PMI with custom symbol is WRONG on the jt model whenviewed with TcVis
7328032
Patch tool inconsistent in Mold Wizard
7328486
Generated Java code has some spelling errors
7328655
Can't see the tool path from a defined goto pointin the machine control
7329681
Can't enter appended text with environment variableset
7330441
KF ug_odbc_recordsetOpen() fails subsequently afterre-opening part
7331569
About zero inner diameter for BEAM sections
7331743
Letter of view label is changed unintentionally inStepped Section Line
7331836
Problem selecting component face with ID-Sybol _ Balloonin section view
7334954
Opening NX 7.5 CAM part file and regenerating in NX9 produce 3 times extra output
7335606
Translucency of the blank geometry is changed automatically
7336750
Zlevel fails to generate
7338346
Commands of "Graphics Window Manager" dialogcannot get recorded
7339437
Symbols in Hole callout dimension appear bold
7340006
Dimensions and annotations go retained when out ofdate NX 7.5 drawing is updated in NX 9. The problem occurs when a booleanoperation is performed. This is a regression introduced by the fix forPR 2184195 in NX 8.5 and NX 8 MR
7340087
In NX 9, disappear component model in the view
7340136
flip extension line gap
7340173
Leader location of the labels having no text changeson view update
7341153
Update Part Modules icon unavailable.
7343227
Symbolic Threads in Promoted Bodies are visible inPMI Lightweight Section View
7343657
Translucency - preference setting problem in Manufacturing
7345967
Values on dialog are incorrect when editing MAD
7347546
Missing bending information in XML output
7347671
Search Reuse Library can't work when place ElectricalPart with Logical Type
7347820
Turning tool rotates on FROM point
7348049
SimpleUDO Example Code will not work properly
7348637
Refer to PR#7348637
7350916
Material change in Modeling has no effect in Adv.Simulation
7350950
SH_MASTER_PART_NAME in title block disappears whenflat pattern view is placed
7351827
Parts List needs to be updated twice to correct calloutorder
7352603
Sheet Metal - UAF: SM Solid Punch: Could not thickenthe sheet tool body
7353538
NX: UF_ROUTE_find_path not finding path when componentis not on RCP
7354585
Selection NX Assembly Component in an NX AssemblyModel as an NX CAM Geometry
7355284
Profile cutout in angle to target gives wrong cutouts
7355564
Assembly containing deformed part always opens asmodified
7355778
Fixed contour cut region dialog does not retain overlapregion setting
7356726
The SM01 & SM02 cannot be opened & internalerror-memory access violation
7357253
Dimensions suppressed and should not be, when brokenview is created
7358110
Problem selecting component face with Quick Pick sectionview
7358297
NX Search fails to find items with Display Rules
7359169
Curve on Surface result seems incorrect
7362888
NX 10: Supported DXF_DWG versions : 'version unknown'in logfile
7366386
Cycle time incorrect for drilling operations due tonon cut units = ipm
7367322
Contour Area operation failed
7367434
Surface finish symbol migrates incorrectly
7367650
NX questions
7368418
Obscurity with Boringtools
7368520
The problem where Adopting a dimension to KF in NXmanaged mode fails is fixed
7368810
Expression linked to attribute breaks on Save As tonew revision in TC env
7368871
NXMGR: Getting error saving files to new revision
7369360
ScCollector > GetObjects takes a very long timeto return tangent faces
7370182
Base string specified name rule no found in part nameis not displayed in NX 10
7370717
Tracking point issue with grooving 3d tool
7370960
Ship design structure reporting double volume in TCmass properties form
7371557
Event MOM_part_attributes missing in CSE simulation
7371833
Thread Mill post output changes in different versions
7372191
Postbuilder - right click on word in block cause "Forced"white bar to disappear
7372509
Reference Text Attribute does not update after a Save-As in NXmanager
7372523
Delay Geometry, Expressions, and PMI Update cannotbe resolved
7372731
Part cannot be closed with 'An illegal file was givento the tag system' error
7376506
Unable to save an NX 9 post in postbuilder NX 10.0.1mp1
7376627
Part Attributes that are synchronized are not updatedusing Edit Stock operation
7376769
xml out not working on part with chosen textheightfor markinglines
7376871
Unable to Create Surface Weld on Face
7377508
Pre NX 9 saved namred references in Teacenter as
7377944
It fixes following issues 1. PR#7377944 Input listfor refile with Dataset CLINames is not working as -part option 2. ugmanger_refilenot honoring user specified load options 3.Native refile doesn't have-help switch
7379136
The problem where the datasetname for PDF export canbe changed if it contains a colon or slash is fixed
7379509
NC: Internal error when updating views
7380212
File -> Print to PDF, first page prints OK, secondpage fails - v9.0.3 SPECIFIC
7380721
CAM Toolpath "ParallelGenerate" don't deletetemporary Datasets in TC
7380792
Pattern feature on UDF gives incorrect results
7381332
Texts are lost when translating to dxf (UGI_GROUP_EXPORT=BLOCK)
7381714
NX 10 MACH ISSUE CUTTING REST MACHINING CONTAINMENT
7382137
UDF with rectangular slots gives alerts after insertion
7382199
Tire Envelope command creates incorrect geometry
7382213
File -> Print fails every second time with Internalerror in NX 9.0.3.4 MP6
7383182
Printing Problems with a 2 sheet drawing
7384035
Need to disable View Tool Bar in NX 9.0.3.4
7384414
VASC, engage_ retract swing angle not working forAgainst Part_Check
7384816
Specify point block is not honoring snap point enabledproperty
7384847
Internal Error
7385572
Expression value will not update with delay part moduleupdate on
7385619
NXMGR: Multiplying quantity of NX assembly components.
7385674
Memory access violation while trying to print in draftingmode
7385894
Area milling create the unnecessary toolpath betweenthe cut area
7387531
Internal error trying to edit or regenerate a latheoperation
7387729
Deviation gauge impacts performance during edit ofgeometry
7388095
File -> Print is returning an Internal Error onsecond File -> Print execution
7388900
About display the full list of item types in the Newdialog
7389230
Normal vector of the plane in which the line liesnot correct for LINE feature
7389532
NX 9 part will not open gets a Modeler error: Coincidentcontrol or spline points
7389778
Moldwizard sub-assy not updating to the INTER-PARTexpressions
7390013
NC data is not output with Batch Process with Backgroundmode
7392030
NX 9.0.3.4 MP6 can not print more then one or twodrawings
7392113
Dimension value changes when opened in later NX version
7392151
The overstock or stock function when using stock ascomponent creates a new component but does not honor the seed file.
7392623
Leader location of the labels having no text changeson view update
7393312
Custom symbol leader arrow heads change orientationin TcVis for VDG 2.
7395405
A changed Path Display Colors will not remain forMill User Defined operations
7395408
Displayable Name in Teamcenter Navigator in NX - Displayadditional attributes
7395622
Unable to create Hole callout dimension on a threadedhole
7395844
mqc_askDimensions() function returns two tags fora single dimension in drafting
7396007
Annotations of deleted bodies not marked in drafting
7396080
Parser (Python) error received calling OGE05 subprogramwith comments
7396264
Getting an Internal Error when selecting a Hole Makingoperation in the ONT
7396748
Separate Feature for Each Body option fails "MakePosition Independent"
7396828
NX351172: UPDATE_DELETE has gone through too manyiterations, pattern of UDF
7397031
Unable to open part NX 9 MP5Modeler error: coincidentcontrol or spline points
7397240
The problem where the datasetname for PDF export canbe changed if it contains a colon or slash is fixed.
7397281
Cannot use environment variable for MW_Wizard_View_ManagerXML file
7397357
NX: bad size for allocation request in storage manager
7397818
Floor Wall operation not generate profile if two frontfaces on same side
7397826
Cannot save post in PB 10.0.1 MP2; corrupts post
7397960
PartSymbolFolderCollection does not work as expected
7398128
How to set not to copy UGPART when "Save As"is executed in TCNX.
7398159
Problema con la funzione Print (internal error_crashwhen printing twice)
7398344
Printing problem
7398600
Unable to display "Text to Line Gap" optionif set "Text above Stub"
7398751
In PDW Measure distance tool not working after striplayout process
7398903
CAM Setup has not been stored inside History (becauseusing gives Internal Error
7399045
Weld Assistant does not honor Feature Sets
7399195
An invalid tag was passed to the tag module
7399631
Post Builder post reports errors when selecting GCode tab
7399914
NX freezes when we execute "View Update"
7399920
Unable to delete view
7400098
The customized command icon does not appear when restartNX
7400183
Unable to create TIFF file in NX10 from nxplot.exe
7400254
Tilt Angle is not applied when generating the toolpath from MB3 or BatchProcess
7400388
Error "Invalid geometry attached to operation"for Wire EDM operation
7400505
File -> Print fails every second time with Internalerror in NX 9.0.3.4 MP6
7400622
Transfer method ignored with floor stock
7400742
Comparison Expression variables not assignable usingOkuma Parser
7401527
Failures with interpart expression in NX10, workedin NX 8.5
7401549
Unable to export JT file, when I have added a radialPMI to a hole-feature
7401873
Convert Mating condition doesn't work: "Objectsupplied is of the wrong type"
7402243
NX 9 Post Builder dropping custom UDE reference
7402494
PartSymbolFolderBuilder method getPartSymbols throwsInvalidCastException
7403036
The display result of 'View Section' is not consistent
7403504
Point selection order determines associatively inTeach Mode Operation
7403552
Refresh Before Each Path when de-selected still refreshesthe path
7404291
The node label can't be corrected
7404604
Assembly components with occurrence type "MEConsumed"are not displayed in NX
7404634
PTS Copy template as new design does not transferclassification to new item
7405841
Cannot change selected body in concept from spreadsheet
7407057
NX 10.0.1 Post Configuratorpost cannot be used in NX 8.5.3 as advertised
7407411
Parts fail to Open using NX 8.5.3 MP9 after attemptingto run refile
7407434
Defpart naming is wrong after update
7407552
Neat trim fails to trim when angle is too large
7408111
mill_tool_change UDE does not pass variables to PostBuilder
7409177
Replace Component resulted in not loading object attributes
7409329
WCS is moving to MCS when cam object is edited(MCSor Operation)
7410068
Unreliable toolpath hole mill operation with temporarygeometry
7410142
Error at a choice «Fanuc» or«Heidenhain» in NX postprocessor
7410245
Deleted (-77) shows up in "Show Out of Date Objects"
7411220
Routing: wrong engagement value in mm-inch couplepart-assembly
7411333
CUTCOM creates additional Circle which returns ina full Circle Move Simulation
7411917
Deleted or Invalid Class ID error on sim file export
7412011
Unable to revise part family member in excel, if originalpart already existed
7412848
Unable to Create Surface Weld on Face
7413284
Getting "Tool Holder Clearance must be greaterthan or equal to zero"
7413303
Performance problem when loading assemblies
7413532
Updating part modules updates out of date featuresmultiple times
7413692
NC assistant misses a face with Levels option
7413716
Material properties related help statements referto incorrect system attribute
7413734
Editing a custom electrode blank component terminatesNX 9 session
7414817
UF_SF_locate_material() cannot get material tag from2D mesh
7414899
NXOpen GetBendParameters() returns weird bend anglevalue of 1145915 as of NX 9
7415877
Measure Bodies causing NULL tag error when measurecertain assembly
7416422
Wrong behave of Attributes (ENG OK but GER not OK)
7417089
Create 0D Elements -- Incorrectly changes all MeshAssociated Data
7417439
The twisted shape is created by the "TireEnvelope"
7417550
Mirror electrode fails to clone blank part from TCin NX managed mode
7417597
NX hangs when the operation name which has 128 charactersis copied and pasted
7417645
Gallery name is displayed incorrectly
7417650
Some icons are not shown when restart NX if usinga customized mtx
7417795
Incorrect rotary axis movement for Fanuc G91
7417994
Mesh update slower in NX 9 and NX 10.0.1 comparedto NX 8
7418280
Attributes do not update in Part Family members aftermodification
7418501
Viewers don't see assembly level color with NX manageddata
7418523
NX ShapeSearch fails for Body with UGII_GENERATE_MULTI_CAD_JTset
7418531
NX: Info.WeldInfo object LogMessage outputting inaccuratemessage
7419493
A part which has Linked Compoiste Curve created beoreNX751, and has source parts completely unloaded, may show curves in wrongposition after Part Import
7419790
Subops in Generic Motion templates are limited toa certain amount
7419848
Zlevel profile operation violates the part geometry
7420183
Unable to keep sorted result after output spreadsheetby customized BOM template
7420240
Inconsistent result when changing spline path lengthon a new\existing part
7420328
Internal error occurs while opening NX drafting part
7420433
Add additional column "last modifying user"in open part file dialog in NX
7420440
Teamcenter Navigator in NX - custom attributes areshown with real name
7420442
MW Drawing inherits Symbol Text Font from Defaultswith own Drafting Standard
7420858
Tool holder collides with part geometry in floor walloperation
7421004
Reduce Ordinate Dimension origin label size, changesto default editing dimension
7421361
Linear Counts on cutter path increased from 75 to547
7421708
GetTaggedObjectVector & GetSelectedObjects doesnot returns selected object
7422218
Prefix_Suffix location from shipbuilding dimensionswill be switched
7422566
Copying a Tool in NX causes the tool to disappearfrom TC View display
7422712
Getting large Initial Move from out in space at absoluteCSYS zero
7422960
Copy and paste of a feature can't be done
7423221
Existing attribute does not allow to edit the value
7423310
Cannot select the Coincident Curve of Face blend
7423766
Bug in tcin_cam_template_setup.bat - tries tcin_cam_template_setup.bat.bat
7423882
Pre-NX6 group resize Grow_Shrink -> None (pleasebackport PR 7393956)
7425246
Overstock not processing Reference Characteristics
7425507
GDT symbol gets tilted during edit and export to DXF/DWG.
7426049
Regression problem: File works in NX 6 but cannotopen in NX 8.5
7427065
Operation does not generate because of "Internalerror"
7427225
The display of assembly parts for grooving tools withan tool tip junction at a different corner then the first was wrong
7427386
Save As New Item Type with different Rev ID as assignedis not possible
7427456
Repeated use of UF_PARAM_CLRPLANE_USAGE makes NX crash
7427544
Node drag is not working in NX 10
7427641
DXF converter is not reading options from the dxfdwg.def
7428456
Part Family Member part is modified message afterpost placement of gasket
7428706
Assembly constraints not immediately displayed whenplacing routing part
7428719
Routing Reuse Search dialog does not show values forsearch criteria
7428739
Rename non-master by saveAs New Item in NX is no longerpossible
7429441
ExportAfu() cannot export correct magnitude and phasevalues in external mode
7429662
Opening part family dialog is takes more time compareto earlier version of NX 10
7429756
Internal error occurs when point dialog icon on "SelectObject" block is pushed
7430627
Feed and Speed -> Failure while generating Toolpath
7431105
The problem where NX STEP AP203 and AP214 translatorproducts are not exporting and importing Nested External References filesis fixed
7431329
Delete core pin causes part model linked body in corefile to be deleted
7431439
Old Alt Rep component replaced in SM BOM continuesto load when sent to NX
7431930
The user cannot select point & snap point on pointdialog in drafting view
7432001
By specifying the "Lock to View" cannot control the helper line
7432003
Clearance handles are not shown when selecting curveswith zero clearance
7432113
File open performance is worse in NX 10.0.1_TC10.1than NX 8.5.3_TC9.1
7432166
Auto Weld Symbol not working in
7432774
Reversed offset direction in mirror feature
7432928
Search object By Name fails with internal error
7432988
The problem where the template region overflow logicshould play role only when contents from different regions overlap eachother (this is mentioned in TDoc) and not when the content of high priorityregion crosses over the boundary of low priority without crossing/overlappingthe content in low priority region is fixed.
7433907
Unable to save as Specification drawing when Saveas new item
7434233
Layer changes when export to dxdwg
7434936
NX Crash on AskEdgeFeats call on specific assemblydrawing
7435201
The problem where the customer cannot save their Routingassembly due to stock descriptor characteristics (i.e. DB_PART_NO) beingapplied is fixed
7435507
While moving assembly file,it throw error "Partsin this session may be corrupt
7435528
Start SpreadSheet of PartFamily in NX 10 takes moretime compared to earlier version
7435547
Closing part family dialog takes more time comparedto earlier versions of NX 10
7435658
Opening part family dialog is takes more time compareto earlier version of NX 10
7435666
While add component and loading in NX 10 takes moretime compared to earlier version
7436198
Centermark does not shows correct position after changingthe hole position.
7436385
MKE does not accept special characters in UDE Label
7436438
Different numbers of curve if Edit parameter or editwith rollback is selected
7437460
Batch Process only calculates the last operation selectedon ONT
7437576
UF_MODL_export_udf() is limited to 13 parameters
7437744
Custom cycle GROUP is always open, even though DEFVALis "start_closed"
7438056
Invalid Filename while open parts with NX 10 becauseof desc part name style
7438229
Hide Business Object rules in BMIDE cause item tonot display or searchable NX
7438787
CAM: Can not delete some Milling Operation
7439067
MW Standard Part cannot create geometry expressionlink from different parts
7439169
Edit arrowhead in mixed state to Closed Solid Arrowfails
7439339
Part cleanup generates retained 2D centerlines
7439411
Cavity Mill Profile gouges Part
7439445
NX: The specified expression variable does not exist
7439794
Attempting to delete category 'ALL' corrupts session
7440155
"Make unique" command cannot controlthe copy behavior of Direct Model
7440262
NX hangs and crashes Fatal error
7440282
Save part family in spreadsheet takes more time inNX 10 compared to earlier version
7440284
MW Standard Part position on plane incorrect dependingon point selection method
7440387
Design part not replacing the seed part when creatinga MENC file using File-New
7440419
Wrong dimension values in Ordinate Dimension
7440684
Channel 1 and 2 swap places when opening sync manager
7440762
Cannot Weld Pipe to Pipe with Hot Fix
7440907
General Packaging - Windshield Vision Zones &Wiper Zones not correct
7441308
After part cleanup if you save the work par then anerror occurs (Attempt to save bad pointer, save aborted)
7441821
Edit Attributes in NX shows two non-editable fieldsfor Value in German UI
7442102
Cannot get values of interpart expression referencesin NX 10 anymore
7442175
Drawing shows out of date (!) in header unable toupdate
7442375
Unable to save to a new rev. via part family
7442664
Overlap Distance is not inherited from the templatepart. in Area Milling
7442666
Tool path at the steep area is not connected correctlywith Z level ZigZag
7442928
The total resistance value of the solver input datais zero
7443347
Loading a specific role when starting NX is not working
7444361
Not possible to save Assembly as Altrep
7445049
Edit Line Segment - Detach Active Control Point changespipe angle
7446190
Error XML out in NATIVE SHIP DESIGN APP NX 9.0
7446738
Cannot open the FEM file
7446913
A problem that does not open the OP2 file of MSC Nastran
7447052
Error XML out Ship application.
7447661
.NET remotingno longer works with an external server process
7447946
Getting an "Internal error" when pressing"All other Parameters" icon
7448083
NX 10 with TC takes a huge time to open the dialogof "part family"
7448089
Start Spreadsheet of Part Family in NX10+TC takesmore time compared to earlier
7448096
NX10+TC takes huge time to save "Spreadsheetof Part Family" compared to earlier
7448104
Closing Part Family dialog in NX 10+TC take more timecompared to earlier version
7448108
While add component and loading in NX10+TC takes moretime compared to earlier
7448143
Selecting elements based on polygon geometry usingrelated elements does not work
7448145
Component status not returning properly
7448270
Machining Knowledge feature teaching and angular dimsof conical surfaces
7448382
PDW - Initialize Project - Internal error: memoryaccess violation
7449784
NX 10 fails to load Parts having expressions
7449991
MW: New project drawing does not show images in the titleblockin NX 9
7450283
Polygon Edge cannot select once it fails in "Stitch"
7450423
Unable to de-select the Pole by "Shift key +select Pole" in X-Form operation
7450599
Missing Home Button in NX10 Web Browser
7450940
CAM Batch Process is executing only the last operation
7451146
File > Close: illegal file given to tag systemdue to exploded view in drafting
7452545
Auto Part Size, Diameters
7452717
Shortest Tool stopped working after upgrading fromMP2 to MP7
7452858
Post error on cycles if tool does not fit in hole
7453664
The problem where NX crashes after exporting jt fromexternal application is fixed
7454195
Assembly raises Update Event Viewer when opened inNX 10
7454752
NX 10 cannot open files from Teamcenter when Userhas log on name with Umlauts
7454784
When saving a UDF in TCNX, an error is displayed
7455488
General Fault Exception when trying to divide cutregions
7455564
Wrong excess material in Analyze
7455796
GRIP EDTEXT causes "Stack Overflow" andterminates NX 10
7455899
Tooling Manufacturing Geometry doesn't maintain FaceRule setting
7456072
Tooling Manufacturing Geometry UI hangs up and NXneeds to be terminated
7456166
Problem where STEP file containing locale characterswas not importing correctly is fixed
7457681
File size has increased 10 fold (7385237)
7458015
Unable to create hpgl file through nxplot.exe commandline in NX 10.0.2
7458337
Internal error: memory access violation (11) whileopening assembly file
7458745
Tire Envelope Wizard yields a sheet body which cannotbe used in modeling operat
7458765
Routing:Null pointer supplied to Routing
7459058
FitCurveBuilder - problem extending both Start andEnd
7459212
Follow Predrill Points are incorrect in Cavity Mill
7459258
Stop At Intersection does not work correctly in providedcase
7460164
Macro playback with long part file name fails withIE or terminates NX
7460165
FBM: Calculation of ThreadLength attribute is wrongin NX 10.0.2.6
7460678
Can not open the assembly file
7460903
Invalid part tag - Error occurred in editing a ReusableComponent
7460914
Input is not a valid parameter when changing fontsize in table note
7461011
DecalBuilder.SetImageFromPart causes An illegal filewas given to the tag system
7461153
Error "Invalid File Name" when loading Partswith referencing InterPartExpr
7461207
FBM_HOLE_MAKING: 'COUNTER SINKING' does not support5-PAR. MILL with Tip Angle
7461299
FBM_HOLE_MAKING: 'HOLE_CHAMFER_MILLING' does not support5-PAR. MILL
7461734
Marking parts as modified
7461929
Part and IPW in Intersection Strategy does not workcorrectly
7462429
Overlapping columns in the HTML file created by Exportto Browser command
7463185
Start and End reversed after adding End Cut(Flared2-Side) to BUP Stiffener
7463255
Select an object to edit the leader "Internalerror" occurs
7463269
In special case, Operation Runner function appearerror, and can't work
7463342
Internal error when try to create Joint Mark in 4GDmode
7463501
Structural Welding cannot generate Weld Preparationon ends of a Profile
7463992
Same issue as PR 7340087 - component disappears inmodel
7464051
NX 10 post does not output correct UDE cutter compensationregister value
7464410
The feeds&speeds and machine control are missingin the planar milling operations
7464751
Countersinking does not work with Standard (Twist)drilling-Tool
7464972
When a grooving tool is remounted on a pocket on aturet it is positioned wrong
7465928
PMI Cylindrical Dimensions have incorrect extensionlines
7466062
Internal error when change Depth per Cut
7466193
Wrong NX 10 attribute dialog when using the Germanuser interface
7466281
Weld Publishing of Pipe Welds Doesn't Work with OurLatest Hot Fixes
7466597
NX: GRIP EDTEXT causes "Stack Overflow"and terminates NX 10
7467273
The display of assembly parts for grooving tools withan tool tip junction at a different corner then the first was wrong
7467425
NX 10 hangs when using "Body(s) Without AssignedMaterial" and a promoted body
7467555
Neutral Factor Value in unfolded view with SB ConvertTo Sheet Metal problem
7468391
Failed mapping units in information window when youimport materials
7469125
Coolant Flow defined within "DEEP_HOLE_DRILLING"is not printed to CLS"
7469153
There is no "Depth Increments" in Deep drillingwith chip breakage Cycle
7469161
Dwell at Starting Point is not outputted into CLSFin DEEP_HOLE_DRILLING
7469163
Datum feature symbol is not created correctly on FCFhaving stub length zero
7469284
Internal error: memory access violation error occurswhile opening part file
7469432
GRIP EDTEXT causes "Stack Overflow" andterminates NX 10
7469599
Light on polygon body issue in assyfem context
7469700
Object Type wrong if ASM will be load by "partialloading"
7469857
Error with "point to Face" 1D connect: atag was passed belonging to an object
7470336
Old tool path not removed from graphical view whengenerating from oper dialog
7470464
Unknown region is displayed in the graphics windowwhen you create a FEM
7470623
Dialog for Partattributes corrupt in German NX 10.0.2.6.Version
7470757
Unable to open Drawing File with "Null tag notallowed" error
7471437
Edit Angular dimension requires re-defining it whereSettings does not
7471779
Memory Access Violation while open a UGMASTER partfile
7471816
Memory Access Violation during view update
7472467
Tool Paths are not refreshed when the operation isregenerated
7472594
Samples machines posts sim01 thru sim09 won't openin Postbuilder
7473258
General Relinker description incorrect
7473423
Cycle Force display strange in post builder 10.0.2
7474064
The specific dimensions has become a cause that causesan error when "Part clean
7475859
Invalid Filename error when fully loading components
7476349
Operation not refreshing old tool path when re-generating
7476697
Wrong value is imported in <(kgf)(mm)(kgf-s^2_mm)>unit system
7476719
EX: GRIP EDTEXT causes "Stack Overflow"and terminates NX 10
7478090
Leader location of the labels having no text changeson view update
7478092
Attributes dialog contains 2 unusable input fieldsfor value+wert in German UI
7478292
Edit Plate Thicken option from two sided to symmetricdoesn't work properly
7479313
Getting wrong part name
7479634
NX freezes when defining constraints during add component
7480074
Display button does not refresh image files
7480118
A Documentation operation can be assigned a tool forreference purposes, but does not contribute to motion in the tool path,so the operation should be ignored when judging for a tool change.
7480165
MOM variable mom_tool_number does not update
7481066
NX MCD crash _ unexpected behavior with objects createdby source
7481463
Unable to design an insert using Parent part typeas "Owning Parent"
7482641
"Problem description:
1) When Item objects are classified in theclassification tree, we do not load them properly into the NX sessionvia the Routing re-use library
2) When a classification hierarchy is definedwith intermediate nodes as type StorageClass (instead of abstract), wedo not find the start nodes properly during our search
Problem solution:
1) For Item objects, set the TEMP_PART_SPECcorrectly in the charx data for the individual member rows so that weknow that we have to look up the specific revision based on the currentrevision rules when we go to load the part into NX
2) Traverse the classification of the hierarchy,including StorageClass nodes, to find the starting nodes for the Routingre-use library tree.Weactually reversed the search order and no longer due a depth first search,find the Classificaiton node with the specific identifier and make surethat node lives under the passed in start node.Thisis much more efficient and does not require searching the entire classificationtree."
7483079
Unable to open part files with "Attempt to freealready freed object" error
7483306
UF_cs2_constraint_type entity error in checkmate
7484543
Tooling Stock Size shows wrong dimensions with existingpattern feature in part
7485037
NX 10 does not recognize template parts in TC11
7485152
Create a box function changed in NX 10
7485419
CLSF Export Bug When Exporting Multiple Toolpathsin a Project Group
7486816
The tool path API support for Helix motions was incompleteand had a couple of issues that needed to be addressed
7488773
Internal error caused when saving part file
7490630
Flat pattern bend radii callout does not maintainunits
7492187
These issues are EB related issues and solves theLWSV cases
7492862
When moving some sliders on the legacy Standard PartManagement dialog box, the labels are being truncated
7495362
When User do MB3 on drafting sheet and perform PartClean up NX outputs "An operation was attempted on an invalid orunsuitable OM object"
7498845
The problem where the datasetname for PDF export canbe changed if it contains a colon or slash is fixed
7499949
The display of assembly parts for grooving tools withan tool tip junction at a different corner then the first was wrong
7500262
An error occurs when deleting an operation
7500467
Progressive Die Wizard Collision checking is not accurate.When running the Collosion Check on the provided Transfer Die, the wholeupper die is highlighted as a collision when in fact it should be a fewcomponents
7501997
NX 10 Macro recording of Base View creation failsplayback due to UG_APP_PMI
7502032
1. Create Mulitple IPEs using wrong names
2. Lists not being converted in inch parts
7502899
Bolt circle dimension changes when scaling a viewon a drawing
7503419
Problem description:
1) When Item objects are classified in theclassification tree, we do not load them properly into the NX sessionvia the Routing re-use library
2) When a classification hierarchy is definedwith intermediate nodes as type StorageClass (instead of abstract), wedo not find the start nodes properly during our search
Problem solution:
1) For Item objects, set the TEMP_PART_SPECcorrectly in the charx data for the individual member rows so that weknow that we have to look up the specific revision based on the currentrevision rules when we go to load the part into NX
2) Traverse the classification of the hierarchy,including StorageClass nodes, to find the starting nodes for the Routingre-use library tree.Weactually reversed the search order and no londer due a depth first search,find the Classificaiton node with the specific identifier and make surethat node lives under the passed in start node.Thisis much more efficient and does not require searching the entire classificationtree."
7503642
The problem where the boundary geometry of Profilemoves of Teach Mode operations is on a wrong plane is fixed
7503938
Problem was originally fixed in NX 10.0.3 but thechange had to be backported to NX 10.0.2MP. There was a new version tokenadded for the MP fix. That token needs to be reused in NX 10.0.3 so thatparts created in NX 10.0.2MP don't regress in NX 10.0.3
7506539
"Problem description:
1) When Item objects are classified in theclassification tree, we do not load them properly into the NX sessionvia the Routing re-use library
2) When a classification hierarchy is definedwith intermediate nodes as type StorageClass (instead of abstract), wedo not find the start nodes properly during our search
Problem solution:
1) For Item objects, set the TEMP_PART_SPECcorrectly in the charx data for the individual member rows so that weknow that we have to look up the specific revision based on the currentrevision rules when we go to load the part into NX
2) Traverse the classification of the hierarchy,including StorageClass nodes, to find the starting nodes for the Routingre-use library tree.Weactually reversed the search order and no londer due a depth first search,find the Classificaiton node with the specific identifier and make surethat node lives under the passed in start node.Thisis much more efficient and does not require searching the entire classificationtree."
7507514
Modl ValidateAndProcessLabel() does not allow @ chars
7509711
1. Create Mulitple IPEs using wrong names
2. Lists not being converted in inch parts
7511380
GM Users do not want to see the wave link warningmessage when using the Create Single Feature option in the Weld PointWizard
7514048
The problem where the datasetname for PDF export canbe changed if it contains a colon or slash is fixed
7514341
When sending workset to NX from TC 4GD Content Explorerthe revRule is not processed correctly. This problem is fixed by thisCP
7515446
The problem where the datasetname for PDF export canbe changed if it contains a colon or slash is fixed
7516969
Re-manage ug owned tiles when un-managing NXOpen UIStylerdialogs. In this specific case, the customer launches a UIStyler dialogfrom a user exit in the File-New dialog (Teamcenter). The dialog launchesbut when the user exits the dialog, the previous (modal) file-new dialogis not remanaged.NX is left in a modal state and must kill it.
7520120
"This CP fixes as issue related to MergeStockcommand. This problem was discovered in EB part (at the moment EB is moreconcerned with totally different issue related to pipe split) as wellas NX 11 beta test.
Since EB will go to NX10.0.3, the fix is being submittedto NX 10.0.3 delta.
7520120: Sometimes stock may have empty identifierattribute.SinceMergeStock command performs strict attribute check, it fails to mergestocks if one stock has empty attribute and the other one does not havethe attribute. In reality empty string attribute is not really a validattribute and it should not prevent stock merge. This CP ignores emptystring characteristics during stock merge."
7520490
Bug on stress results on volume elements with orthotropicmaterial
7521073
"Clone of NX376402 to Routing_nx10mr_delta
ATK wants the bend radius design rule to ignore suppressedstocks.
I'm backporting this fix to 10.0.3 because Nathan(ATK) told Mandar during the beta test event in Milford that ATK is thinkingabout going to 10.0.3."
7529760
"This CP fixes as issue related to MergeStockcommand. This problem was discovered in EB part (at the moment EB is moreconcerned with totally different issue related to pipe split) as wellas NX11 beta test.
Since EB will go to NX.10.0.3, the fix is being submittedto NX 10.0.3 delta.
7520120:
Sometimesstock may have empty identifier attribute.SinceMergeStock command performs strict attribute check, it fails to mergestocks if one stock has empty attribute and the other one does not havethe attribute. In reality empty string attribute is not really a validattribute and it should not prevent stock merge. This CP ignores emptystring characteristics during stock merge."
7530542
The display of assembly parts for grooving tools withan tool tip junction at a different corner then the first was wrong
7533163
Part not initialized
8250013
Teach Mode - Cut pattern changes
8250187
Opening Replica Assembly -Error " Attempted functionidsm_distributed_app @site
8250222
Curve Length fails
8250244
NXOpen doesn't return contained features of Patternand Mirror instances
8250484
Encountered Null pointer attempt to convert MultiLevelFlex mating conditions
8250508
PMI LightWeight Section View doesn't move sectionentities to other layer
8250513
File > Save fails with the message: BVR is notchecked out
8250570
Performance issue to convert Wiring cable V1 to V2specific Locked Length Spline
8250633
Blend Corner fails
8250957
Reuse library symbol in drawing title block is nottranslated to DXF_DWG format
8251000
NX Measure Point - Show Dimension display incorrectvalues
8251033
Top Selection Priority in quick pick changed
8251149
Global Shaping updates to error since MP2
8251168
Adding an NX 6 UDF does not work anymore with NX9:cannot paste sketch
8251179
In the old part family template if we add any newmember at last row, the last row was getting replaced with existing memberat first row
8251385
Standard parts created does not get recognized byCutting Side
8251440
2D Exchange translator doesn't handle file errors
8251510
Note -> Insert Object Attribute doesn't list anydrawing sheet attributes
8251644
Law extension - merge faces results in gap
8251660
JT - Name of NX-Facet-Body is not converted
8251785
Unable to update views on drawing
8251844
Law Extension - merge Face if Possible - not updateStable
8251875
Weld symbol edit failed
8251932
Große Dateien beim CGM-Exportieren
8252012
Vehicle Design Automation: Close Range Visibilty -maximum length for blind vo
8252262
Unsuppress of last feature takes too long
8252470
Curve Smooth does not work correctly
8252485
Global Shaping does not work all around and not correct
8252571
Baugruppe NX 7.5 kann nicht in NX 9.0 geladen werden
8252781
Interpart expressions are multiplied by 1000
8252795
Diameter Baseline Dimension not work for invisibleCenterlines
8252860
Deleting marking lines takes long time and ends witherror
8252994
Datum Coordinatesystem losses associatively when changingfrom offset to dynamic
8253096
UF_UI_set_minimal_graphics_window() regression inNX 9
8253219
When edit a CAM Operation appears "Null tag notallowed"
8253332
CAM: Paths unlocked manually are locked when partis reopened
8253410
NX 10 MP - RR Issue 3616 - Results Probe with DR pointfunction gives wrong result
8253785
Reg_NX 9.0.2: internal errors (Parasolid ifail 934from ENPBEN) with NX 9.0.3
8253791
'auto. coupling' constraint - opening .sim and switchingfrom .fem to .sim slow
8253806
Electrical Routing: NX crashes during renaming ofMulti Port
8253826
CAM Face_Mill_Manual Regions have Gouges - Wrong errormessage
8253865
Part Name Management, cannot change to Reference ifpart contains drawing
8253960
Zero thread dimension after updating the view (lostreferences)
8253977
Switching between solutions slow if 'automatic coupling'constraints defined...
8254175
Changing 'automatic coupling' constraint display affects'.sim' file open time
8254277
RR Issue 3643 - Bug in Time Step Control - editedvalues are not retained
8254350
Check mate failure
8254369
MultiCAD: Error when saving parts with referencesto JT components (RC 580163)
8254534
WIR V2 Reattach Spline Removes Lock Length
8254611
Intersection Curve is Out of Tolerance after modificationof an area that has
8254724
Law Extension Deviation
8254760
Can't create a detail view
8254798
PDW toolbar workflow reorganization
8254861
Replace Feature of a Sew by a Trim and Extend Featuredoesn't work
8254867
Not able to open partfile or make it the displayedpart in Assembly Context
8254877
CAM Cavity_Mill Problem IPW and Holder Collisions3
8254940
Tool Axis Decimal Places Output Problem
8255022
Find in Navigator - Warning
8255041
Product Interfaces not visible in the target
8255061
Reg_NX 9.0.3_D1 - Uable to pick PMI Centerline orCenter Mark to create Linear Dims
8255065
SAE Manikin Wizard input field looses control to featureafter reordering
8255077
Error occurred when updating hidden line display
8255092
Cannot create stock offset fixture port
8255123
Using 'Stock offset Point' clears extension and backextension
8255154
Relations Browser does not show links of fully loadedpart
8255182
Inconsistent display of new curve direction
8255193
Problem with dimensions associated to view dependentcenterlines
8255229
Missing alert about legacy product interfaces
8255235
Interpart Expression does not get updated after replacingcomponent
8255256
Weld Point Wizard Distance Tolerance setting
8255270
Offset curve oif 50mm causes NX to hang
8255298
It has to be possible to disable the "ResistanceSpot" in Customer Defaults
8255301
Not possible to change associativ translated weldpointto fixed see PR1959880
8255321
UDF loses color definition
8255329
Display will freeze after undefined actions of bigassemblies
8255338
Open a parasolid file leads to error
8255360
Replace component breaks links
8255368
Selecting node within group via "Nodes by Group"fails for single node group
8255379
Call of a Builder in User Exit causes disorder inPart Navigator
8255385
ID Symbols do not show text in NX 9.0.3, was finein NX 7.5
8255409
Unable to replace links in part
8255420
In NX 10.0.1 ip1 we are not getting the same PMI reportthat we saw in NX 9.0.3
8255422
Alert Internal error during update of weld points
8255435
Incorrect Change Reason Status In the SynchronizeLinks
8255496
Law Extension should give an alert when the desiredmiter cannot be created
8255528
Link changes unexpected to pos. independent aftersynchronize in displayed part
8255542
Selecting comp (ANAV Dependency panel) is slow
8255549
Up to date part displayed as out of date
8255588
The Meshing of some solid body is not possible withNX 10
8255670
Useless points after reopening a file with a projectedpoint
8256313
Pedestrian Protection - Wrong WAD curves
8256356
RR Issue 3885 - Solver time heat transfer plugin -function builder ignores cert
8256625
Unable to open partfile -> internal error
8256692
Regression: Method "Import" of the interface"UFPatt" creates the min-Max-Box
8256925
ANAV: Error 11 while calling callback with reason553
8257809
G17_19 issue
8257928
Memory access violation in NX 10.0 using KF ODBC
8258457
Trim angle check is not associativ
8258603
Spline Length Constraints cause poor performanceswhen editing a RSpline
8259018
Sketch lose Midpoint Constrain
8259895
Exporting a Drawing with 2DExchange some dimensionslose the referenced objects
8260340
Assign button for dataset name is missing
8262206
When using Mill Boundary by Points, the first pointgets lost
8263130
Bad Performance in NX 9 Spline Path with 15+ points
8263681
NX Sheet Metal - bead over cutout
8263688
NX Sheet Metal - bead ending in cut out
8264427
The original code set the base color to whole binderbody. Which is not consistent with fiat's requirement
8266572
NX: Report Shortest Path gives a wrong result causingthe collision path
8268022
Wave Link causes lost of Material Information
8268277
Replace of Thicken not possible
8268280
PS27.01.209 - Feature Playback failed
8268321
Performance problem of Divide Face
8268602
Feature Playback Error T0929
8268732
Update starts during load even if delay update isactive
8268751
Selection during Animation
8268851
Failure returning outline of body at cut level
8269065
When the interpart update is delayed, Motion doesn'tshow obvious reflactionof the "out of update" status
8269080
File-Print crashes NX on second print
8269298
In the Upper Roof Selection Wizard of the functionHead Impact the correct req
8269311
Motion Envelop with Option Process in Backrounddoesn't honor the start part
8269531
PMI is not visible in View of converted JT
8269813
DXF Radial Dimensions scaled on NX Import
8270011
Routing Spline Path edit performance investigationof user error on constraints
8270015
Error-code 904 reported during ugmanager_refile
8270093
Company logo (custom symbol), is not translated toDWG when part of title block
8270418
PS27.1.211 - Feature Playback Error Blend Corner
8270452
Electrode Design: Rename Components not possible anymore in NX 10
8270728
DIE Wave Link Datum Planes are not updated
8270858
Unable to generate tool path -> Operation usedsuspect geometry
8270898
This problem was discovered in NX10.0.3 although itcan be reproduced in NX10.0 onwards. The Law Extension features createdin previous releases produced different geometry leading to downstreamfeature failures.
8270909
Assign button for dataset name is missing
8271164
Attributes dialog contains 2 unusable input fieldsfor value+wert in German UI
8271203
TC_NX_TCNavigator_Column_Config does not display propertyvalues in TC Navig
8271296
The loading-plane should be created and displayednot on layer 11 but on layer 1
8271652
Beam Section property calculation time too long -IDEAS UNV solver environment
8271884
In the selection wizard for the function Head Impactonly one component of a p
8272338
Moving a stacked PMI fires a error message
8272398
Slow perf. NX_PRODUCT_INTERFACE_FIXUP_OPTIONS=repair,'Load interpart data'
8272436
The point "Corner of bumper" is createdat the wrong place in NX 10
8272568
Unexpected update on OK in General Relinker
8272627
System response time not acceptable when cursor ismoved across geometry
8272746
Assign button for dataset name is missing
8272755
Journal generates an error when tracing a point inarticulation solution
8272907
Up to date expression changes to out of date aftersource file load
8272915
Assigning interpart expression to object causes outof date geometry
8272933
Fonts to use setting shows part as scope, but is session
8272942
Naming convention broken on replace of interface expressionwith same name
8273131
Current Production NX 9 Harness Won't Open in NX 10
8273183
No Preview of Section Curve for a JT_Facet body inView Section command
8273256
NX 10 Weldpoint-Labels are not displayed in 3D-Viewer
8273328
FTL - Current Production Smaragd NX 9 Harness WontOpen IN NX 10
8273376
NX 9 Parts cannot be opened (invalid foreign Expression)
8273403
Cannot create sim, afem component from .fem (emptyresult)
8273515
Geometry not shown, only Bounding Boxes (BackgroundLoading apparently )
8273568
Definition of Draft Angle does not remain expressionsetting
8273624
Internal Error when changing Reference Set (Pseudo-POPLapparantly involved)
8273920
Edge Patch Fail to patch up all loops depending onpatch order
8273964
Export of multiple FRF in csv format using Save Graphfrom a PLOT
8274030
The 50mm in Y direction offset-line of the BonnetSide Reference Line with the
8274039
The geometry of the bonnet rear edge reference lineis not correct to be create
8274040
NX memory blowup when loading JT exact
8274351
Drawing not loadable
8274360
Failure to open Linked Mirrored Part when source isloaded
8274413
Reusable pocket the thread is not copied in the linkedbody
8274445
Show exact on JT file causes memory overflow
8274538
NX Welding: Weld orientation vector is not updatedafter geometry modification
8274555
Weld orientation vector is not updated after pointposition modification
8274609
The 82.5mm behind in x direction offset-line for thebonnet leading edge refer
8274657
Part Cannot be opened in NX 10
8274695
UGPART fails to open: Invalid file name
8274697
Rear Crash barriere RCAR(2004) is placed at wrongheight
8274725
PARAMs are duplicated when using a GROUP in a customcycle
8274892
The created Bonnet rear reference line with arealdata (SEW) under the Assess
8274937
Misbehaviour: Interpart Expressions in NX 10
8274966
Object associativitytype is invalid with part cleanup and angular dimension
8275056
Moldwizard - Create Geometric Expression Link failswith legacy UI
8275095
NX 10 ExpressionCollection AskInterpartLhsName_AskInterpartRhsNamecreate objects
8275246
The Wrap around distance 2100(WAD2100) is not symmetricwith the class-A data
8275252
The 82.5mm offset-line of the Bonnet Rear ReferenceLine with class-A data fro
8275282
Issue with graphics in FEM Model
8275307
Internal Error after defining and changing workbenches
8275328
Update view rotates Label Arrow heads
8275335
Update view moves GDT symbol leader
8275396
The created upper bumper reference line is positionednot correctly for the leg
8275519
NX9 Drawing can't open in NX 10
8275613
Failure to remove a component in NX 10.0.1.4
8275693
Failure to save an exact mirror part in NX 10.0.1.4
8275729
The created Bonnet Side Reference Line under the AssessmentProgram "Global"
8275735
Make Current Feature undactive Feature Group are not linked in Part Modules
8276001
Editing a law extension takes very long
8276150
Drawing: lots of data in memory after moving a viewwith crosshatches (Boundary
8276151
Drawing: Bad performance moving a view with crosshatches(boundary curves)
8276471
Broken Expression Product Interfaces after open inNX 10
8276474
Show_Hide of udfs not correct
8276557
NXOpen.Display.DecalBuilder.GetImagesInPart throws"Object no longer exists"
8276596
Mirror Feature does not work on UDF
8276637
NXOpen.Display.DecalBuilder needs multiple Commit()call for correct scaling
8276658
Attribute Mapping with Tc LOV causing troubles
8276856
NX JT translator error 1250
8276928
Attributes of CSYS of a hole are not updated in themirror part
8276980
DecalBuilder.SetImageFilename() does not replace imagefrom disk in NX 10
8277020
Sig11 when changing applications, PMI & PartialLoading involved
8277216
Error loading fem after replacing component
8277290
CAM: Sequential Drilling with Depth User Defined -Full length only
8277447
Reg_NX100024 Wrong representation of smooth end gapsin view
8277456
The parametric tool (tangential drilling tool) isnot shown as solid
8277572
For Weld Point Wizard, if using the "reuse feature"option, do not allow a type that is different then the one specified onthe dialog
8277573
Add new toggle "Create Single Features"so user has option if "Single Features"
8277573
Daimler was promised an Enhancement to the WeldingLegacy Convert Utility (Converts NX 9.0 Resistance Spot welds to new NX10.0 feature type) Add new toggle "Create Single Features" souser has option if "Single Features" should be created by theutility, or if features should be grouped by a master feature. PRs submittedby QA team 7511633,7511911,7513067 and resolved in CP.
8277626
1) when creating reuse features in a different featuregroup, the reused weld points are left in the original feature group
2)a change was made to the signature of 2 NXopen functions in NX 10 thatmay affect the stability of existing customer NXOpen functions
8277662
This is to fix customer relinker failure in managedmode and one IE with view feature failure in case of part being closed
8277766
Selection of Measure causes NX to crash
8277850
Adaptively analysis 'steady stress (absolute) error'with sol 401can be wrong
8277857
Spline have a Tangent parent. The dialog say thereis no parent
8277860
Not able to open partfile in NX 10
8277861
PMI causes update error
8278015
The drag node command has the Cohesive Ratio option,but is only for volume elements. Thus this option has been removed
8278070
TC_CAM: Parametric Tools are automatically deletedby opening a CAM-Part
8278106
The quality checks on 3D elements is not availablein the samcef environment
8278167
When user create a hole feature in a part having assembly-componentstructure then to infer target body it takes time. User make componentpart as work part and then pick a hole point. Depending upon the holeorigin selection, hole will infer its target body. This inferring takeslong time when component part is make as work part however if componentpart is make as displayed part then inferring target body operation iscompleted in 10 to 12 seconds.
8278472
Adaptive meshing analysis is failing due to poor qualityelements...
8278491
Adaptive meshing analysis is failing due to incompletemesh...
8278649
A delete expression regression
PR8278774
NX freezes when doing SCAO on the edge/face case
8279273
Creating field of postview of worst principal wasgiving memory violation. This was not allowing user to provide with theworkflow
8279494
Creating field of postview of worst principal wasgiving memory violation. This was not allowing user to provide with theworkflow
8279526
Attribute units are invalid (not known in this part)when using template
8279655
Certain Simulation Models may go through a BC validationduring a Replace FEM operation. This happens before the new FEM has beenassigned to the Simulation, causing the validation to crash when a NULLPTRis de-referenced.
8280603
When listing attributes to the listing window NX couldcrash if one of the attribute values had a very long length
8280868
When creating non-associative weld points, if a pointis selected from part navigator, the resulting weld point will be associativeinstead of non-associative
8281160
1) output weld points are not being projected if projectionoption is on. the projection option will be hidden if associative optionis toggled on
8281215
Incorrect import of load scaling if vendor is MSCNastran in NX 10 and NX 11
8281361
Regression due to IPE/MFK conversion
8282134
The PDF converter is executed via command line. Ifthe converter software is not installed in the default location, the commandexecution fails, but the user has no indication this is the reason whyno PDF file was produced
8282425
Annotations with extensions are hidden when view breakis applied
8500148
Failed to create transition in NX 9, NX 7.5 worksfine
8500180
PR2242392 is not fixed on NX 10ip23 though CRR saysit is fixed on ip21
8500480
Unable to open a part with Internal error:memory accessviolation
8500861
Note leader stub position and alignment differ somecases
8501094
NX crash while adding CSE variable "VC1'
8501620
Failed to create profile cutout in NX
8501665
UF_ATTR_set_user_attribute() returns error code 580014in NX 10
8502510
NC path missing intermittently in flow cut referencetool operation
8503090
Spline method is changed when editing a spline pathcreated by "By poles" method
8504021
Extra NC path generated on the areas not selectedas Cut Area
8504512
CGM file cannot be imported in NX 10
8505783
CAM Face_Mill_Manual Regions have Gouges - Wrong errormessage
8505943
The object changes to translucent after select itin ONT
8506062
Extreme Point Measurement feature is not localizedin PNT
8506772
Internal error occurs when running Create Region Listand Delete All three times
8506844
While add component and loading in NX 10 takes moretime compared to earlier version
8507020
GetParameterData() & Aspect() does not returnvalues
8507142
When moving split body, the associative curves arenot updated well
8508183
Grip primary message was not honoring 40 characterlimit
8508685
Export to CSV, and the attribute of measurement inChinese is wrong
8508768
ksc_5601 Teamcenter encoding was not mapped
8509983
"work order" does not works in NX 10, NX9 works fine
8510246
TABNOT_cell can_update_with_unloaded_refs(..) wasoverridden in NX 10 to return TRUE so that attributes on unloaded objectsand referenced by cells are evaluated. Parts List cells are evaluatedon master model close which triggers parts list update. During auto balloonprocessing of Exact views, while determining whether reference balloonis present on a component, call to Drawing
8702416
Unable to export a tabular note to DWG
升级后，自定义设置在进入任务草图后会消失，请问有解决办法吗
页:
[1]